<?xml version="1.0" ?>
<document version="1.8" entity_encoding="single">
  <page number="1">
    <text>DMD Level 3
Unit A: Biomechanics and Preclinical Orthodontics

THE UNIVERSITY OF WESTERN AUSTRLIA

Orthodontic Seminar

• Part 1. Orthodontic Diagnosis &amp; Treatment Planning
• Part 2. Biologic Response to Orthodontic Force
• Part 3. Mechanical Principles in Controlling Orthodontic Force
• Part 4. Orthodontic Anchorage and Controlled Tooth Movement

1</text>
    <formatted_text>DMD Level 3

Unit A: Biomechanics and Preclinical Orthodontics

*The University of Western Australia*

Orthodontic Seminar

- Part 1. Orthodontic Diagnosis &amp; Treatment Planning
- Part 2. Biologic Response to Orthodontic Force
- Part 3. Mechanical Principles in Controlling Orthodontic Force
- Part 4. Orthodontic Anchorage and Controlled Tooth Movement</formatted_text>
  </page>
  <page number="2">
    <text>Part 1. Orthodontic Diagnosis &amp; Treatment Planning

THE UNIVERSITY OF WESTERN AUSTRALIA

Be sure that you are able to:

1. Recognize and evaluate skeletal and dental relationships in all three planes of space.

2. **Recognize and quantify the patient's arch length status.**

3. **Evaluate the skeletal and arch length considerations, interactions and appropriateness of treatment or non-treatment.**

4. **Recommend treatment or referral of specific problems based upon case evaluation.**

**REVIEW PREVIOUS SEMINARS**

2</text>
    <formatted_text>Be sure that you are able to:

1. Recognize and evaluate skeletal and dental relationships in all three planes of space.
2. Recognize and quantify the patient's arch length status.
3. Evaluate the skeletal and arch length considerations, interactions and appropriateness of treatment or non-treatment.
4. Recommend treatment or referral of specific problems based upon case evaluation.

Review previous seminars.</formatted_text>
  </page>
  <page number="3">
    <text>1. Recognize and evaluate skeletal and dental relationships in all three planes of space.
Ackerman-Proffit Classification

THE UNIVERSITY OF WESTERN AUSTRALIA

![](L3 3A Level III UnitA(1)_figures/img_5121523c7dab21a6.webp)</text>
    <formatted_text>1. Recognize and evaluate skeletal and dental relationships in all three planes of space.

Ackerman-Proffit Classification</formatted_text>
    <images>
      <img order="0" bbox="70,219,905,890" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_5121523c7dab21a6.webp">
        <description>This diagram illustrates the Ackerman-Proffit Classification, depicting three overlapping circles representing Transverse, A-P (Anterior-Posterior), and Vertical relationships. Each circle contains yellow text comparing 'Skeletal' versus 'Dental' factors, all enclosed within a larger oval labeled 'Dento-Facial'. The term 'Protrusion?' is visible on the right side of the diagram.</description>
      </img>
    </images>
  </page>
  <page number="4">
    <text>ALIGNMENT/ASYMMETRY

THE UNIVERSITY OF
WESTERN
AUSTRALIA

Mixed dentition space analysis form.

4

![](L3 3A Level III UnitA(1)_figures/img_c0045e09df15b7ba.webp)
![](L3 3A Level III UnitA(1)_figures/img_e78df69d99f76553.webp)</text>
    <formatted_text>Mixed dentition space analysis form.</formatted_text>
    <images>
      <img order="0" bbox="104,326,412,567" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_c0045e09df15b7ba.webp">
        <description>A clinical photograph of a white dental cast (study model) showing the maxillary arch. The image displays the palate and the arrangement of teeth, including incisors, canines, premolars, and molars.</description>
      </img>
      <img order="1" bbox="104,579,421,834" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_e78df69d99f76553.webp">
        <description>Clinical photo of a dental study model (cast) mounted on an articulator, showing the upper and lower jaws in occlusion. The model depicts mixed dentition with visible spacing between the central incisors and erupted permanent teeth.</description>
      </img>
    </images>
  </page>
  <page number="5">
    <text>## ESTHETIC IMPACT OF MALOCCLUSION

THE UNIVERSITY OF WESTERN AUSTRALIA

ANNE C.
12Y 6M INITIAL

5

![ANNE C. 12Y 6M INITIAL](L3 3A Level III UnitA(1)_figures/img_1b99b5021911590a.webp)</text>
    <formatted_text>*Anne C., 12Y 6M, initial*</formatted_text>
    <images>
      <img order="0" bbox="94,233,891,979" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L3 3A Level III UnitA(1)_figures/img_1b99b5021911590a.webp" caption="ANNE C. 12Y 6M INITIAL">
        <description>A composite clinical record for a patient named Anne C. (12 years 6 months, initial) featuring three facial photographs (frontal at rest, frontal smiling, and lateral profile), a lateral cephalometric radiograph, and a corresponding cephalometric tracing.</description>
      </img>
    </images>
  </page>
  <page number="6">
    <text># TRANSVERSE RELATIONSHIPS

Palatal Width
AB
CD

Palatal Width
AB
CD

6

![Palatal Width AB CD](L3 3A Level III UnitA(1)_figures/img_cb11f318a5d346e5.webp)
![Palatal Width AB CD](L3 3A Level III UnitA(1)_figures/img_7076457707088256.webp)</text>
    <formatted_text>Palatal Width — panels A, B, C, D</formatted_text>
    <images>
      <img order="0" bbox="351,332,642,623" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_cb11f318a5d346e5.webp" caption="Palatal Width AB CD">
        <description>A schematic line drawing of a dental arch viewed from above, illustrating transverse dimensions. Two red double-headed arrows span the width of the arch at different levels: an upper arrow labeled 'AB' measures across the premolar/molar region, while a lower arrow labeled 'CD' measures the distance between the distal aspects of the molars.</description>
      </img>
      <img order="1" bbox="348,676,648,924" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_7076457707088256.webp" caption="Palatal Width AB CD">
        <description>A schematic diagram of a dental arch illustrating transverse palatal width measurements. Two red double-headed arrows indicate specific widths: 'AB' represents the anterior measurement across the upper teeth, and 'CD' represents the posterior measurement at the base of the molars.</description>
      </img>
    </images>
  </page>
  <page number="7">
    <text># A-P RELATIONSHIPS

THE UNIVERSITY OF WESTERN AUSTRALIA

* Class I skeletal pattern
* Class II skeletal pattern
* Class III skeletal pattern

7</text>
    <formatted_text>- Class I skeletal pattern
- Class II skeletal pattern
- Class III skeletal pattern</formatted_text>
  </page>
  <page number="8">
    <text>VERTICAL RELATIONSHIPS

THE UNIVERSITY OF
WESTERN
AUSTRALIA

SAPERE AUDE

ANNE C.
12Y 6M INITIAL

8

![](L3 3A Level III UnitA(1)_figures/img_33349489df4adf04.webp)
![ANNE C. 12Y 6M INITIAL](L3 3A Level III UnitA(1)_figures/img_8088d17963d594db.webp)</text>
    <formatted_text>*Anne C., 12Y 6M, initial*</formatted_text>
    <images>
      <img order="0" bbox="37,306,553,912" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_33349489df4adf04.webp">
        <description>Clinical photo: A lateral view of a white dental cast showing the upper and lower arches in occlusion, illustrating the vertical relationship between the maxilla and mandible.</description>
      </img>
      <img order="1" bbox="567,304,956,909" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L3 3A Level III UnitA(1)_figures/img_8088d17963d594db.webp" caption="ANNE C. 12Y 6M INITIAL">
        <description>A lateral cephalometric tracing showing the profile of a skull and cervical spine with superimposed analysis lines. The image depicts hard tissue outlines including the maxilla, mandible, and dentition, overlaid with horizontal and vertical reference planes used for assessing skeletal relationships.</description>
      </img>
    </images>
  </page>
  <page number="9">
    <text>Part 2. Biologic Response to Orthodontic Force

THE UNIVERSITY OF WESTERN AUSTRALIA

Be sure that you are able to:

1. Describe the histologic/cellular/vascular response of the supporting structures to force applied to teeth.
2. Discuss the role of biologic electricity in maintenance and turnover of alveolar bone.
3. Describe the relationship of orthodontic force levels to anchorage.

9</text>
    <formatted_text>Be sure that you are able to:

1. Describe the histologic/cellular/vascular response of the supporting structures to force applied to teeth.
2. Discuss the role of biologic electricity in maintenance and turnover of alveolar bone.
3. Describe the relationship of orthodontic force levels to anchorage.</formatted_text>
  </page>
  <page number="10">
    <text>Biologic Response to Orthodontic Force

1. Describe the histologic/cellular/vascular response of the supporting structures to force applied to teeth.

10</text>
    <formatted_text>1. Describe the histologic/cellular/vascular response of the supporting structures to force applied to teeth.</formatted_text>
  </page>
  <page number="11">
    <text>&lt;table&gt;
  &lt;tr&gt;
    &lt;td colspan=&quot;2&quot;&gt;TIME SEQUENCE -LIGHT&lt;br&gt;CONTINUOUS PRESSURE&lt;/td&gt;
  &lt;/tr&gt;
  &lt;tr&gt;
    &lt;td&gt;1.MILLISECONDS -&lt;/td&gt;
    &lt;td&gt;FLUID PRESSURE UP&lt;br&gt;PIEZO-ELECTRIC EFFECT&lt;/td&gt;
  &lt;/tr&gt;
  &lt;tr&gt;
    &lt;td&gt;2.SECONDS -&lt;/td&gt;
    &lt;td&gt;FLUID PRESSURE BALANCED&lt;/td&gt;
  &lt;/tr&gt;
  &lt;tr&gt;
    &lt;td&gt;3.MINUTES -&lt;/td&gt;
    &lt;td&gt;BLOOD FLOW AFFECTED&lt;/td&gt;
  &lt;/tr&gt;
  &lt;tr&gt;
    &lt;td&gt;4. HOURS -&lt;/td&gt;
    &lt;td&gt;CELLULAR DIFFERENTIATION&lt;br&gt;BEGINS&lt;/td&gt;
  &lt;/tr&gt;
  &lt;tr&gt;
    &lt;td&gt;5. DAYS -&lt;/td&gt;
    &lt;td&gt;APPPOSITION/RESORPTION&lt;br&gt;TOOTH MOVEMENT&lt;/td&gt;
  &lt;/tr&gt;
&lt;/table&gt;</text>
    <formatted_text>Time sequence — light continuous pressure:

1. **Milliseconds** — fluid pressure up; piezo-electric effect
2. **Seconds** — fluid pressure balanced
3. **Minutes** — blood flow affected
4. **Hours** — cellular differentiation begins
5. **Days** — apposition/resorption; tooth movement</formatted_text>
  </page>
  <page number="12">
    <text/>
  </page>
  <page number="13">
    <text>1. Describe the histologic/cellular/vascular
response of the supporting structures to force
applied to teeth.

THE UNIVERSITY OF
WESTERN
AUSTRALIA

![](L3 3A Level III UnitA(1)_figures/img_bf7ab6dab6ba67bd.webp)
![](L3 3A Level III UnitA(1)_figures/img_60fba5382d5e1252.webp)
![](L3 3A Level III UnitA(1)_figures/img_2ea6f31fb36f1240.webp)
![](L3 3A Level III UnitA(1)_figures/img_9330de0db8bdc776.webp)</text>
    <formatted_text>1. Describe the histologic/cellular/vascular response of the supporting structures to force applied to teeth.</formatted_text>
    <images>
      <img order="0" bbox="200,232,406,593" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L3 3A Level III UnitA(1)_figures/img_bf7ab6dab6ba67bd.webp">
        <description>This is a schematic histological diagram illustrating the interface between connective tissue fibers and a mineralized surface, likely representing the periodontal ligament attaching to tooth root cementum or alveolar bone. The left side depicts parallel red fiber bundles with embedded oval-shaped cells (fibroblasts), while the right side shows a yellow matrix with black dashes indicating a calcified structure.</description>
      </img>
      <img order="1" bbox="247,612,408,976" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_60fba5382d5e1252.webp">
        <description>A schematic cross-section illustrating the histologic response of supporting structures to applied force. The image depicts a boundary between two tissue types: a yellow region with vertical dashes (representing bone) and a pink region containing wavy red fibers and scattered cells (representing the periodontal ligament). Cells are shown positioned at the interface, suggesting cellular activity or remodeling in response to mechanical stress.</description>
      </img>
      <img order="2" bbox="683,233,864,593" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_2ea6f31fb36f1240.webp">
        <description>A schematic diagram illustrating the histological interface between collagen fibers (red wavy lines) and a mineralized surface (yellow textured area), showing cellular components embedded within the fiber matrix.</description>
      </img>
      <img order="3" bbox="741,613,864,976" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_9330de0db8bdc776.webp">
        <description>This schematic diagram illustrates the histologic response of supporting structures to applied force, specifically depicting a cross-section of bone remodeling. It shows the interface between two tissue types: a left region with red wavy striations (representing collagen fibers or soft tissue) and a right yellow region with black dashes (representing mineralized bone matrix). Embedded along this interface are several large pink cells with dark nuclei (osteoclasts/osteoblasts) actively resorbing or depositing material, creating visible scalloped indentations known as Howship's lacunae.</description>
      </img>
    </images>
  </page>
  <page number="14">
    <text>HEAVY PRESSURE

TOTAL SHUT-OFF OF BLOOD FLOW

STERILE NECROSIS = HYALINIZATION

14</text>
    <formatted_text>Heavy pressure:

- Total shut-off of blood flow
- Sterile necrosis = hyalinization</formatted_text>
    <audio_inserts count="7">
      <insert timestamp="00:04:46" confidence="7" anchor="#### **Alignment and Asymmetry**  Mixed dentition space analysis form.">

&gt; [!note] Lecturer — Study Models
&gt; Study models help evaluate arch shape and identify discrepancies.
&gt;
&gt; - In mixed dentition, space analysis can predict the space required for eruption of the permanent teeth.
&gt; - Cast models also show transverse discrepancies, excessive overbite, anterior open bite, and other vertical relationships.
</insert>
      <insert timestamp="00:05:34" confidence="6" anchor="#### **Esthetic Impact of Malocclusion**  *Anne C., 12Y 6M, initial*">

&gt; [!note] Lecturer — Esthetic Effects
&gt; Malocclusion affects the lips and soft-tissue profile because the soft tissues reflect the position of the underlying teeth. Lack of space or excessive incisor proclination can alter lip behavior, the facial profile, and the overall esthetic result of treatment.
&gt;
&gt; - In a hyperdivergent patient, the mandibular angle and lower facial height are increased.
</insert>
      <insert timestamp="00:07:28" confidence="6" anchor="#### **Transverse Relationships**  Palatal Width — panels A, B, C, D">

&gt; [!note] Lecturer — Crossbite Analysis
&gt; Transverse analysis can be performed on cast models by comparing the upper and lower arches. Palatal width helps differentiate skeletal from dental crossbites.
&gt;
&gt; - A dental crossbite may occur with normal palatal width when the upper molars have a normal inclination or are excessively tilted lingually because an altered eruption pathway has produced an abnormal dental inclination.
&gt; - A skeletal crossbite may occur when the upper arch is constricted and the palatal width is very narrow; the upper molars may compensate by tipping buccally.
&gt; - In a severe skeletal crossbite, the upper arch may lie completely lingual to the lower arch, and molar compensation may be insufficient to correct the discrepancy.
&gt; - The extent of molar tipping depends on the severity of the upper-arch deficiency or narrowing.
</insert>
      <insert timestamp="00:09:11" confidence="6" anchor="#### **Anteroposterior Relationships**  - Class I skeletal pattern - Class II sk">

&gt; [!note] Lecturer — Profile Analysis
&gt; Profile analysis can suggest the underlying skeletal pattern and helps differentiate skeletal relationships from dental relationships.
&gt;
&gt; - A balanced profile may be associated with a skeletal Class I pattern.
&gt; - A convex profile may be associated with a Class II malocclusion.
&gt; - A concave profile may be associated with a Class III malocclusion.
</insert>
      <insert timestamp="00:13:25" confidence="6" anchor="Days — apposition/resorption; tooth movement">

&gt; [!note] Lecturer — Cellular Signaling
&gt; Over hours and days, osteoclasts and osteoblasts participate in bone turnover. Prostaglandins and cytokines allow these cells to communicate, and the balance between their activities depends on the amount released.
</insert>
      <insert timestamp="00:15:19" confidence="7" anchor="Heavy pressure:  - Total shut-off of blood flow - Sterile necrosis = hyalinizati">

&gt; [!note] Lecturer — Sterile Necrosis
&gt; Complete vascular blockage deprives the periodontal ligament of nutrients and can cause sterile necrosis, which is not caused by infection. Hyalinization reorganizes the periodontal ligament, but tooth movement is delayed; if it remains nonviable, the required bone-turnover cells must come from the bone itself, which takes more time.
</insert>
      <insert timestamp="00:15:52" confidence="3" anchor="Cells from trabeculae - PDL necrotic — no viable cells  cells from trabeculae">

&gt; [!note] Lecturer — Undermining Resorption
&gt; When the periodontal ligament is completely compressed, resorption cannot proceed normally from the periodontal-ligament side. Resorption therefore proceeds through undermining resorption, with cells coming from bone rather than the periodontal ligament; this delays tooth movement while the ligament is rebuilt.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="482,463,582,569" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="clipart">
        <description>A cyan arrow pointing diagonally down and to the right against a black background.</description>
      </img>
    </images>
  </page>
  <page number="15">
    <text>15

![](L3 3A Level III UnitA(1)_figures/img_70d93c0d162d2a29.webp)</text>
    <images>
      <img order="0" bbox="0,58,998,944" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_70d93c0d162d2a29.webp">
        <description>A photomicrograph of a histological tissue section showing distinct cross-sections of tubular structures, likely blood vessels or ducts, embedded within a fibrous stroma. The image features prominent staining with deep red regions in the upper left and blue-green tones outlining the concentric layers of the central circular structure.</description>
      </img>
    </images>
  </page>
  <page number="16">
    <text>Cells from
trabeculae

PDL Necrotic
No viable cells

16

![PDL Necrotic No viable cells](L3 3A Level III UnitA(1)_figures/img_0b8e7bb169b98662.webp)</text>
    <formatted_text>- Cells from trabeculae
- PDL necrotic — no viable cells</formatted_text>
    <images>
      <img order="0" bbox="0,50,999,952" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_0b8e7bb169b98662.webp" caption="PDL Necrotic No viable cells">
        <description>A histological micrograph showing tissue sections with distinct staining, featuring a diagonal band of orange-stained fibrous tissue separating dark blue cellular regions from pale yellow areas. The image includes annotations identifying specific features such as necrotic periodontal ligament (PDL) and cells originating from trabeculae.</description>
      </img>
    </images>
  </page>
  <page number="17">
    <text>**Undermining**
**resorption**
Cells from
trabeculae
17

![](L3 3A Level III UnitA(1)_figures/img_4deefd6993f1c742.webp)</text>
    <formatted_text>Undermining resorption — cells from trabeculae</formatted_text>
    <images>
      <img order="0" bbox="0,39,993,949" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_4deefd6993f1c742.webp">
        <description>A histological micrograph showing a section of bone tissue with distinct staining. A blue arrow labeled &quot;Cells from trabeculae&quot; points to cellular structures within the bone matrix, while red text indicates an area of &quot;Undermining resorption&quot; where cells appear to be eroding the bone surface.</description>
      </img>
    </images>
  </page>
  <page number="18">
    <text>Biologic Response to Orthodontic
Force

2. Discuss the role of biologic electricity in maintenance and turnover of alveolar bone.

18</text>
    <formatted_text>2. Discuss the role of biologic electricity in maintenance and turnover of alveolar bone.</formatted_text>
  </page>
  <page number="19">
    <text># THE PIEZO-ELECTRIC EFFECT

Changing the shape of a crystalline material causes an electrical current flow

19

![](L3 3A Level III UnitA(1)_figures/img_b48162c215d1cf00.webp)</text>
    <formatted_text>Changing the shape of a crystalline material causes an electrical current flow.</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:11:05" confidence="9" anchor="Changing the shape of a crystalline material causes an electrical current flow.">

&gt; [!note] Lecturer — Piezoelectric Signaling
&gt; Rapid loading bends or loads alveolar bone and changes the orientation of electrons through its crystalline structure, producing a very small electric current. This electrical change can affect cell-membrane balance and cell differentiation before there is enough time for periodontal-ligament fluid to drain.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="618,304,906,752" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_b48162c215d1cf00.webp">
        <description>A photograph of a cluster of translucent, pointed quartz crystals growing from a dark rock base.</description>
      </img>
    </images>
  </page>
  <page number="20">
    <text># PIEZO-ELECTRICITY IN BONE

**SOURCE**
• Bone Mineral
• Collagen

**EFFECT:**
• Rhythmic pulses of electric pulses during function (chewing, walking etc.)
• Important in order to maintain mineralisation

20

![](L3 3A Level III UnitA(1)_figures/img_517dfd2438036c2a.webp)</text>
    <formatted_text>**Source**

- Bone mineral
- Collagen

**Effect**

- Rhythmic pulses of electric pulses during function (chewing, walking etc.)
- Important in order to maintain mineralisation</formatted_text>
    <images>
      <img order="0" bbox="44,242,323,604" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_517dfd2438036c2a.webp">
        <description>A monochrome photograph showing a cluster of crystalline mineral formations, likely quartz or similar piezoelectric crystals. The image serves as a visual metaphor for the crystalline structure of bone mineral mentioned in the slide text.</description>
      </img>
    </images>
  </page>
  <page number="21">
    <text>21

![](L3 3A Level III UnitA(1)_figures/img_0cc9552b35f56bbd.webp)</text>
    <images>
      <img order="0" bbox="21,37,980,948" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="chart" path="L3 3A Level III UnitA(1)_figures/img_0cc9552b35f56bbd.webp">
        <description>A line graph plotting charge against time in seconds, illustrating a transient response to a stimulus. The curve shows a sharp positive rise at the point marked &quot;on&quot; (t=1s), followed by a decay back toward zero and a sharp negative drop at the point marked &quot;off&quot; (t=2s), after which it gradually recovers.</description>
      </img>
    </images>
  </page>
  <page number="22">
    <text>Time course of events: Heavy biting pressure

Periodontal ligament as a shock absorber

**Milliseconds**
Fluid incompressible in periodontal ligament

**Seconds**
Fluid leaking out

**&lt;Minute**
Fluid gone: **Pain**

22</text>
    <formatted_text>Time course of events: heavy biting pressure — periodontal ligament as a shock absorber

- **Milliseconds** — fluid incompressible in periodontal ligament
- **Seconds** — fluid leaking out
- **&lt; Minute** — fluid gone: pain</formatted_text>
    <audio_inserts count="2">
      <insert timestamp="00:20:30" confidence="5" anchor="Time course of events: heavy biting pressure — periodontal ligament as a shock a">

&gt; [!note] Lecturer — Pain Medication Timing
&gt; Medication intended to reduce pain should be prescribed approximately 15 minutes before the appointment to block prostaglandin release involved in the initial pain response. Taking it several minutes after the procedure does not prevent the initial trigger.
</insert>
      <insert timestamp="00:21:47" confidence="7" anchor="Anchorage: resistance to unwanted tooth movement.  450 533 254 282 194 230  450 ">

&gt; [!note] Lecturer — Anchorage Units
&gt; Anchorage is quantified by root surface area, the amount of root surface covered by bone, and the periodontal-ligament surface area involved. Teeth with larger or multiple roots resist movement more, and joining several teeth increases the anchorage unit; for example, posterior teeth can be combined to retract canines and then incisors after extractions.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="21,366,466,587" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="clipart">
        <description>A 3D graphic showing a red cube being compressed by two large red arrows pointing inward from opposite sides. The cube rests on a grey, concentric ring base and bears a black label reading 'Periodontal ligament as a shock absorber'.</description>
      </img>
    </images>
  </page>
  <page number="23">
    <text>Biologic Response to Orthodontic Force

3. Describe the relationship of orthodontic force levels to anchorage.

23</text>
    <formatted_text>3. Describe the relationship of orthodontic force levels to anchorage.</formatted_text>
  </page>
  <page number="24">
    <text># Anchorage

Resistance to Unwanted Tooth movement

24</text>
    <formatted_text>Anchorage: resistance to unwanted tooth movement.</formatted_text>
  </page>
  <page number="25">
    <text>450 533 254 282 194 230

450 475 240 270 200 170

25

![Relative Anchorage values](L3 3A Level III UnitA(1)_figures/img_b8d16b6975defb22.webp)</text>
    <formatted_text>450 533 254 282 194 230

450 475 240 270 200 170</formatted_text>
    <images>
      <img order="0" bbox="203,20,865,806" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_b8d16b6975defb22.webp" caption="Relative Anchorage values">
        <description>A schematic diagram illustrating the relative anchorage values of various tooth segments. The teeth are grouped into pairs and labeled with numerical values (e.g., 450, 533, 254) representing their resistance to movement.</description>
      </img>
    </images>
  </page>
  <page number="26">
    <text>Types of anchorage

Simple
Reciprocal
Reinforced
Stationary

26

![](L3 3A Level III UnitA(1)_figures/img_b16af780af3f86fc.webp)</text>
    <formatted_text>- Simple
- Reciprocal
- Reinforced
- Stationary</formatted_text>
    <images>
      <img order="0" bbox="678,661,851,802" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_b16af780af3f86fc.webp">
        <description>A 3D rendered model of a rhinoceros standing in profile against a black background. The figure shows the animal's textured skin, horns, and ears.</description>
      </img>
    </images>
  </page>
  <page number="27">
    <text>Simple anchorage
27</text>
    <formatted_text>Simple anchorage</formatted_text>
  </page>
  <page number="28">
    <text>**Reciprocal anchorage**
28</text>
    <formatted_text>Reciprocal anchorage</formatted_text>
  </page>
  <page number="29">
    <text>**Reinforced anchorage**
29</text>
    <formatted_text>Reinforced anchorage</formatted_text>
  </page>
  <page number="30">
    <text>**Stationary anchorage**
30</text>
    <formatted_text>Stationary anchorage</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:24:08" confidence="7" anchor="Stationary anchorage">

&gt; [!note] Lecturer — Anchorage Types
&gt; The anchorage types differ in how much movement is expected within the connected unit.
&gt;
&gt; - Simple anchorage connects teeth with unequal resistance, so the tooth with lower anchorage moves more.
&gt; - Reciprocal anchorage connects teeth with similar resistance, so both move reciprocally.
&gt; - Reinforced anchorage adds teeth to increase resistance.
&gt; - Stationary anchorage applies force closer to the anchorage unit's centre of resistance to encourage bodily movement and reduce its displacement.
</insert>
    </audio_inserts>
  </page>
  <page number="31">
    <text>31</text>
  </page>
  <page number="32">
    <text/>
  </page>
  <page number="33">
    <text># Part 3. Mechanical Principles in Controlling Orthodontic Force

THE UNIVERSITY OF
WESTERN
AUSTRALIA

Be sure that you are able to:

1.  **Define and apply the principles of anchorage in appliance design to control and minimize unwanted tooth movement.**

2.  Describe and recognize different types of removable orthodontic appliances in the following categories: (a) functional appliances; (b) Crozat; (c) Hawley type; and (d) Clear Aligner Therapy.

3.  Describe and make correct appliance designs of the active Hawley type with specific recommendations for these components: (a) active; (b) retention; (c) connector; and (d) reactive or anchorage.

4.  Select the correct wire size for active and retentive elements of active Hawley type appliances.

5.  Define and explain the biomechanical principles that pertain to orthodontics, specifically the meaning of terms such as &quot;force&quot;, &quot;moment&quot;, &quot;fulcrum&quot;, &quot;center of rotation&quot;, and &quot;anchorage&quot; as applied to biomechanics.

6.  Demonstrate the relationship between wire size, strength, stiffness and the force produced for a given deflection.

7.  Explain the difference between tipping and bodily tooth movement, and how an applied force can produce either.

33</text>
    <formatted_text>Be sure that you are able to:

1. Define and apply the principles of anchorage in appliance design to control and minimize unwanted tooth movement.
2. Describe and recognize different types of removable orthodontic appliances in the following categories: (a) functional appliances; (b) Crozat; (c) Hawley type; and (d) Clear Aligner Therapy.
3. Describe and make correct appliance designs of the active Hawley type with specific recommendations for these components: (a) active; (b) retention; (c) connector; and (d) reactive or anchorage.
4. Select the correct wire size for active and retentive elements of active Hawley type appliances.
5. Define and explain the biomechanical principles that pertain to orthodontics, specifically the meaning of terms such as &quot;force&quot;, &quot;moment&quot;, &quot;fulcrum&quot;, &quot;center of rotation&quot;, and &quot;anchorage&quot; as applied to biomechanics.
6. Demonstrate the relationship between wire size, strength, stiffness and the force produced for a given deflection.
7. Explain the difference between tipping and bodily tooth movement, and how an applied force can produce either.</formatted_text>
  </page>
  <page number="34">
    <text>2. Describe and recognize different types of removable orthodontic appliances in the following categories:
(a) functional appliances; (b) Crozat; (c) Hawley type; and
(d) Clear Aligner Therapy.

THE UNIVERSITY OF
WESTERN
AUSTRALIA
SEEK WISDOM

34

![a](L3 3A Level III UnitA(1)_figures/img_b320a11995a40140.webp)
![b](L3 3A Level III UnitA(1)_figures/img_5a3df756b8ca3ce3.webp)
![c](L3 3A Level III UnitA(1)_figures/img_7180ee3549677f85.webp)
![d](L3 3A Level III UnitA(1)_figures/img_91b1644783edfe66.webp)</text>
    <formatted_text>Describe and recognize different types of removable orthodontic appliances in the following categories:

- (a) functional appliances
- (b) Crozat
- (c) Hawley type
- (d) Clear Aligner Therapy</formatted_text>
    <images>
      <img order="0" bbox="90,294,449,585" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_b320a11995a40140.webp" caption="a">
        <description>A clinical photograph of a removable orthodontic appliance, specifically a functional device featuring a translucent green acrylic body with bilateral pads and an attached wire framework including a central loop and lateral bows.</description>
      </img>
      <img order="1" bbox="96,610,439,976" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_5a3df756b8ca3ce3.webp" caption="b">
        <description>Clinical photograph showing an occlusal view of a maxillary dental cast fitted with a removable orthodontic appliance. The appliance features a wire framework extending from the anterior region across the palate to clasps on the posterior teeth, consistent with a Crozat design.</description>
      </img>
      <img order="2" bbox="549,243,907,579" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_7180ee3549677f85.webp" caption="c">
        <description>This is a clinical intraoral photograph showing the maxillary arch with a removable orthodontic appliance in place. The device features a wire framework that includes clasps engaging the posterior teeth and an anterior loop resting on the palate, characteristic of a functional or retentive appliance.</description>
      </img>
      <img order="3" bbox="544,612,915,973" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_91b1644783edfe66.webp" caption="d">
        <description>Clinical photo: A close-up of a smiling patient holding a transparent plastic dental aligner in front of their teeth. The image illustrates the aesthetic and removable nature of the appliance.</description>
      </img>
    </images>
  </page>
  <page number="35">
    <text>3. Describe and make correct appliance designs of the active
Hawley type with specific recommendations for these
components: (a) active; (b) retention; (c) connector; and (d)
reactive or anchorage.

THE UNIVERSITY OF
WESTERN
AUSTRALIA
SINE WISDOM

4. Select the correct wire size for active and retentive elements
of active Hawley type appliances.

• Lab Bow 0.7—0.8mm

• Adams molars 0.7 mm
premolars 0.6 mm

• Finger spring guarded
0.6mm unguarded 0.7mm

• Ball clasp 0.7 mm

• C clasp 0.7mm

35

![](L3 3A Level III UnitA(1)_figures/img_90a38924bc857a98.webp)</text>
    <formatted_text>Describe and make correct appliance designs of the active Hawley type with specific recommendations for these components: (a) active; (b) retention; (c) connector; and (d) reactive or anchorage.

Select the correct wire size for active and retentive elements of active Hawley type appliances:

- Lab Bow: 0.7–0.8 mm
- Adams clasp: molars 0.7 mm; premolars 0.6 mm
- Finger spring: guarded 0.6 mm; unguarded 0.7 mm
- Ball clasp: 0.7 mm
- C clasp: 0.7 mm</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:34:52" confidence="4" anchor="C clasp: 0.7 mm">

&gt; [!note] Lecturer — Finger Spring Design
&gt; The active Hawley appliance described was designed to correct an anterior crossbite of a central incisor.
&gt;
&gt; - The finger spring may be positioned beneath or outside the acrylic and contains two helices.
&gt; - Activation involves pulling the relevant wire segment downward toward the cervical part of the incisor.
&gt; - Stainless steel is used because nickel-titanium wire cannot be bent to produce this design.
&gt; - A smaller 0.6 or 0.7 mm stainless-steel wire increases resilience and allows force release over a longer period.
&gt; - Patients are usually reviewed every second week so that the spring can be reactivated.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="543,410,897,790" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L3 3A Level III UnitA(1)_figures/img_90a38924bc857a98.webp">
        <description>Clinical photograph of an active Hawley type orthodontic appliance mounted on a dental cast. The image shows the yellow acrylic baseplate and various stainless steel wire components, including clasps and springs.</description>
      </img>
    </images>
  </page>
  <page number="36">
    <text>5. Define and explain the biomechanical principles that pertain to orthodontics, specifically the meaning of terms such as &quot;force&quot;, &quot;moment&quot;, &quot;fulcrum&quot;, &quot;center of rotation&quot;, and &quot;anchorage&quot; as applied to biomechanics.

THE UNIVERSITY OF WESTERN AUSTRALIA

* Force
    * ...that action of one body on another body which causes or tends to cause a change in shape or motion or both of the second body
    * G or $\text{g/cm}^2$
* Point of application (were)
* Magnitude (size, Newtons)
* Sense (direction)

36

![](L3 3A Level III UnitA(1)_figures/img_d5138733d088e78b.webp)</text>
    <formatted_text>Define and explain the biomechanical principles that pertain to orthodontics, specifically the meaning of terms such as &quot;force&quot;, &quot;moment&quot;, &quot;fulcrum&quot;, &quot;center of rotation&quot;, and &quot;anchorage&quot; as applied to biomechanics.

- **Force** — that action of one body on another body which causes or tends to cause a change in shape or motion or both of the second body; measured in g or g/cm²
- Point of application (where)
- Magnitude (size, Newtons)
- Sense (direction)</formatted_text>
    <images>
      <img order="0" bbox="670,284,819,895" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L3 3A Level III UnitA(1)_figures/img_d5138733d088e78b.webp">
        <description>The image displays a schematic diagram of a tooth, likely representing a canine given its pointed root structure. A metal orthodontic bracket is adhered to the crown surface, with an archwire threaded through the slots and ligated in place. A distinct red oval marker is superimposed on the wire near the center of the bracket, highlighting a specific point of interest such as the line of action or center of resistance.</description>
      </img>
    </images>
  </page>
  <page number="37">
    <text>5. Define and explain the biomechanical principles that
pertain to orthodontics, specifically the meaning of terms
such as &quot;force&quot;, &quot;moment&quot;, &quot;fulcrum&quot;, &quot;center of rotation&quot;,
and &quot;anchorage&quot; as applied to biomechanics.

THE UNIVERSITY OF
WESTERN
AUSTRALIA

Centre of Resistance

– To complete the description of a force
  • need to define it in relation to the centre
    or resistance of the tooth

– Burstone –from apex usually 2/3 root
  and just above furcation on molars

37

![](L3 3A Level III UnitA(1)_figures/img_3daa4f199fa2de18.webp)
![](L3 3A Level III UnitA(1)_figures/img_f7d7da8a497beb74.webp)</text>
    <formatted_text>To complete the description of a force, we need to define it in relation to the centre of resistance of the tooth.

- Burstone: from the apex, usually 2/3 of the root length and just above the furcation on molars.</formatted_text>
    <images>
      <img order="0" bbox="562,317,682,839" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_3daa4f199fa2de18.webp">
        <description>A labelled diagram illustrating the 'Centre of Resistance' on a tooth. The figure shows a schematic cross-section of a tooth root with a red dot marking the specific location of this centre, which is described in the accompanying text as being approximately 2/3 down from the apex.</description>
      </img>
      <img order="1" bbox="739,338,930,850" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_f7d7da8a497beb74.webp">
        <description>A labelled diagram showing a cross-section of a molar tooth with orthodontic brackets and archwire attached to the crown. A red dot marks the center of resistance, located between the roots just above the furcation.</description>
      </img>
    </images>
  </page>
  <page number="38">
    <text>5. Define and explain the biomechanical principles that pertain to orthodontics, specifically the meaning of terms such as &quot;force&quot;, &quot;moment&quot;, &quot;fulcrum&quot;, &quot;center of rotation&quot;, and &quot;anchorage&quot; as applied to biomechanics.

THE UNIVERSITY OF WESTERN AUSTRALIA

* Moment = Tendency to rotate

38

![](L3 3A Level III UnitA(1)_figures/img_82293c50cf132de7.webp)</text>
    <formatted_text>- Moment = tendency to rotate</formatted_text>
    <images>
      <img order="0" bbox="133,383,946,933" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_82293c50cf132de7.webp">
        <description>Schematic diagram illustrating the biomechanical principle of moment generation in orthodontics, showing that a 50 g force applied 10 mm from the center of rotation produces an equivalent system of a 50 g force plus a 500 g·mm moment.</description>
      </img>
    </images>
  </page>
  <page number="39">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA

• Couple = Two equal and opposite, non colinear,
parallel forces

– Pure rotation around center of rotation (CR)

10g
10g
10g
10g

39</text>
    <formatted_text>- **Couple** = two equal and opposite, non-colinear, parallel forces
  - Pure rotation around the centre of rotation (CR)

*Figure: four 10 g forces shown acting on the tooth.*</formatted_text>
  </page>
  <page number="40">
    <text/>
  </page>
  <page number="41">
    <text>**THE UNIVERSITY OF WESTERN AUSTRALIA**

**Moment = F x d g.mm**

d
F

**Uncontrolled Tipping**

41</text>
    <formatted_text>**Moment = F × d (g.mm)**

*Figure: force F applied at distance d from the centre of resistance — uncontrolled tipping.*</formatted_text>
  </page>
  <page number="42">
    <text>How do we apply couples?

THE UNIVERSITY OF WESTERN AUSTRALIA

42</text>
    <formatted_text>How do we apply couples?</formatted_text>
  </page>
  <page number="43">
    <text>THE UNIVERSITY OF WESTERN AUSTRALIA

## Bodily movement

Moment = F x d g.mm

EQUAL couple
Opposite dirn

43</text>
    <formatted_text>Bodily movement:

- Moment = F × d (g.mm)
- Equal couple, opposite direction</formatted_text>
  </page>
  <page number="44">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA

**COMPRESSION**

Centre of Resistance

Add this couple

**FORCE**

*What will happen?*

44</text>
    <formatted_text>A force applied at the centre of resistance produces **compression**. Add this couple (a **force** with a couple) — *what will happen?*</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:44:25" confidence="7" anchor="A force applied at the centre of resistance produces **compression**. Add this c">

&gt; [!note] Lecturer — Controlling Tipping
&gt; Applying force at the bracket rather than at the centre of resistance produces uncontrolled tipping, with one region of the periodontal ligament compressed and the opposite region placed under tension.
&gt;
&gt; - A rectangular wire engaged in a rectangular bracket slot produces an additional moment.
&gt; - Twisting the wire or incorporating torsion in the bracket creates an opposing moment, allowing bodily movement without placing the bracket at the centre of resistance.
&gt; - A more controlled movement produces compression on one side and traction on the other.
</insert>
    </audio_inserts>
  </page>
  <page number="45">
    <text>5. Define and explain the biomechanical principles that pertain to orthodontics, specifically the meaning of terms such as &quot;force&quot;, &quot;moment&quot;, &quot;fulcrum&quot;, &quot;center of rotation&quot;, and &quot;anchorage&quot; as applied to biomechanics.

THE UNIVERSITY OF WESTERN AUSTRALIA

* Centre of Rotation
  * Another method to describe tooth movement

45</text>
    <formatted_text>- Centre of Rotation
  - Another method to describe tooth movement</formatted_text>
  </page>
  <page number="46">
    <text># Uncontrolled Tipping

=

46</text>
    <formatted_text>Uncontrolled tipping</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:46:03" confidence="5" anchor="Uncontrolled tipping">

&gt; [!note] Lecturer — Centre of Rotation
&gt; The centre of rotation is the point that does not move during a particular tooth movement, whereas the centre of resistance is the point through which a force would produce bodily movement.
&gt;
&gt; - During controlled tipping, the centre of rotation is positioned near the apex of the incisor.
&gt; - The amount of torque must be individualized because a central incisor requires a different amount of torque from a lateral incisor.
</insert>
    </audio_inserts>
  </page>
  <page number="47">
    <text/>
  </page>
  <page number="48">
    <text/>
  </page>
  <page number="49">
    <text>6. Demonstrate the relationship between wire size, strength, stiffness and the force produced for a given deflection.

• Effect of changing wire size

• If you **double** the **diameter** of the wire
– 8 times as STRONG
– 16 times as STIFF
– Will bend ½ as Far

49</text>
    <formatted_text>Demonstrate the relationship between wire size, strength, stiffness and the force produced for a given deflection.

Effect of changing wire size — if you **double** the **diameter** of the wire:

- 8 times as STRONG
- 16 times as STIFF
- Will bend ½ as far</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:50:59" confidence="6" anchor="Will bend ½ as far">

&gt; [!note] Lecturer — Wire Resilience
&gt; Stainless steel is relatively stiff, so loops and helices are incorporated to increase the length of wire available for bending.
&gt;
&gt; - A 0.6 mm stainless-steel wire provides greater resilience than a thicker wire and can be compressed and released without a permanent bend.
&gt; - Rectangular wires such as 16 × 22, 19 × 25, and 21 × 25 engage differently in the bracket slot.
&gt; - Increasing the thickness of a rectangular wire increases torque or rotational control, whereas round wire does not fully engage the rectangular slot.
</insert>
    </audio_inserts>
  </page>
  <page number="50">
    <text>6. Demonstrate the relationship between wire size, strength, stiffness and the force produced for a given deflection.

THE UNIVERSITY OF
WESTERN
AUSTRALIA
SINE WISDOM

• Effect of changing wire length

• If you make a &lt;span style=&quot;color: orange;&quot;&gt;finger spring twice as long&lt;/span&gt;

– 1/2 as STRONG

– 8 times as springy

– Will bend 4 times as Far

50</text>
    <formatted_text>Effect of changing wire length — if you make a finger spring twice as long:

- 1/2 as STRONG
- 8 times as springy
- Will bend 4 times as far</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:50:00" confidence="6" anchor="Will bend 4 times as far">

&gt; [!note] Lecturer — Spring Construction
&gt; Orthodontic springs use multiple loops or helices and reduced-diameter stainless-steel wire to provide greater resilience and a more sustained release of force.
&gt;
&gt; - If wire length is increased while diameter is reduced, stiffness is reduced further and resilience is increased.
&gt; - The objective is to produce a spring that can release an appropriate force over a longer period.
</insert>
    </audio_inserts>
  </page>
  <page number="51">
    <text># Part 3. Mechanical Principles in Controlling Orthodontic Force

THE UNIVERSITY OF
WESTERN
AUSTRALIA
SAPIER SINE LABE

Be sure that you are able to:

1. Define and apply the principles of anchorage in appliance design to control and minimize unwanted tooth movement.
2. Describe and recognize different types of removable orthodontic appliances in the following categories: (a) functional appliances; (b) Crozat; (c) Hawley type; and (d) Clear Aligner Therapy.
3. Describe and make correct appliance designs of the active Hawley type with specific recommendations for these components: (a) active; (b) retention; (c) connector; and (d) reactive or anchorage.
4. Select the correct wire size for active and retentive elements of active Hawley type appliances.
5. Define and explain the biomechanical principles that pertain to orthodontics, specifically the meaning of terms such as &quot;force&quot;, &quot;moment&quot;, &quot;fulcrum&quot;, &quot;center of rotation&quot;, and &quot;anchorage&quot; as applied to biomechanics.
6. Demonstrate the relationship between wire size, strength, stiffness and the force produced for a given deflection.
7. Explain the difference between tipping and bodily tooth movement, and how an applied force can produce either.

DONE

51</text>
    <formatted_text>Be sure that you are able to:

1. Define and apply the principles of anchorage in appliance design to control and minimize unwanted tooth movement.
2. Describe and recognize different types of removable orthodontic appliances in the following categories: (a) functional appliances; (b) Crozat; (c) Hawley type; and (d) Clear Aligner Therapy.
3. Describe and make correct appliance designs of the active Hawley type with specific recommendations for these components: (a) active; (b) retention; (c) connector; and (d) reactive or anchorage.
4. Select the correct wire size for active and retentive elements of active Hawley type appliances.
5. Define and explain the biomechanical principles that pertain to orthodontics, specifically the meaning of terms such as &quot;force&quot;, &quot;moment&quot;, &quot;fulcrum&quot;, &quot;center of rotation&quot;, and &quot;anchorage&quot; as applied to biomechanics.
6. Demonstrate the relationship between wire size, strength, stiffness and the force produced for a given deflection.
7. Explain the difference between tipping and bodily tooth movement, and how an applied force can produce either.</formatted_text>
  </page>
  <page number="52">
    <text>Part 4. Orthodontic Anchorage
and Controlled Tooth
Movement

THE UNIVERSITY OF
WESTERN
AUSTRALIA
SAPIENTIAE ET SOROR

Be sure that you are able to:

1. Describe the reaction of a tooth to a single force placed against the crown.
2. Describe the reaction of a tooth to a two-force system placed against the crown as a function of the moment-to-force ratio.
3. Indicate the changes in orthodontic forces and moments needed for successful movement of a tooth that has lost alveolar bone support (as from previous periodontal disease).
4. Describe the adaptations in the contemporary edgewise appliance to reduce in-out (first order) bends in arch wires.
5. Describe the adaptations in the contemporary edgewise appliance to reduce angulation (second order) bends in arch wires.
6. Describe the adaptations in the contemporary edgewise appliance to reduce torque (third order) bends in rectangular arch wires.

DONE

52</text>
    <formatted_text>Be sure that you are able to:

1. Describe the reaction of a tooth to a single force placed against the crown.
2. Describe the reaction of a tooth to a two-force system placed against the crown as a function of the moment-to-force ratio.
3. Indicate the changes in orthodontic forces and moments needed for successful movement of a tooth that has lost alveolar bone support (as from previous periodontal disease).
4. Describe the adaptations in the contemporary edgewise appliance to reduce in-out (first order) bends in arch wires.
5. Describe the adaptations in the contemporary edgewise appliance to reduce angulation (second order) bends in arch wires.
6. Describe the adaptations in the contemporary edgewise appliance to reduce torque (third order) bends in rectangular arch wires.

DONE</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:44:25" confidence="6" anchor="2. Describe the reaction of a tooth to a two-force system placed against the cro">

&gt; [!note] Lecturer — Tooth Force Systems
&gt; A single force applied away from the centre of resistance produces a moment and causes tipping. A couple uses opposing forces to generate a controlled rotational effect.
&gt;
&gt; - Rectangular wires engaged in rectangular slots create a couple that can counteract the tipping moment.
&gt; - The combination of the bracket force and the opposing moment can produce bodily movement.
&gt; - Compression occurs on one side of the periodontal ligament, while traction occurs on the opposite side.
</insert>
    </audio_inserts>
  </page>
  <page number="53">
    <text>3. Indicate the changes in orthodontic forces and moments needed for successful movement of a tooth that has lost alveolar bone support (as from previous periodontal disease).

THE UNIVERSITY OF WESTERN AUSTRALIA

Lighter Forces  
Biological

Larger  
Couples

53</text>
    <formatted_text>3. Indicate the changes in orthodontic forces and moments needed for successful movement of a tooth that has lost alveolar bone support (as from previous periodontal disease).

- Lighter forces
- Biological
- Larger couples</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:54:57" confidence="4" anchor="3. Indicate the changes in orthodontic forces and moments needed for successful ">

&gt; [!note] Lecturer — Reduced Bone Support
&gt; Periodontal bone loss moves the centre of resistance apically, increasing the distance between the bracket and the centre of resistance. Applying the same force at the bracket therefore produces a larger moment and a greater rotational effect.
&gt;
&gt; - The force must be individualized according to the remaining bone support.
&gt; - Progressively lighter forces are used in patients undergoing periodontal treatment.
</insert>
    </audio_inserts>
  </page>
  <page number="54">
    <text>Design of the Staightwire
Appliance

THE UNIVERSITY OF
WESTERN
AUSTRALIA

4. Describe the adaptations in the contemporary edgewise appliance to reduce in-out (first order) bends in arch wires.

5. Describe the adaptations in the contemporary edgewise appliance to reduce angulation (second order) bends in arch wires.

6. Describe the adaptations in the contemporary edgewise appliance to reduce torque (third order) bends in rectangular arch wires.

54

![The Straight-Wire Appliance](L3 3A Level III UnitA(1)_figures/img_9549eb34d25062c7.webp)</text>
    <formatted_text>4. Describe the adaptations in the contemporary edgewise appliance to reduce in-out (first order) bends in arch wires.

5. Describe the adaptations in the contemporary edgewise appliance to reduce angulation (second order) bends in arch wires.

6. Describe the adaptations in the contemporary edgewise appliance to reduce torque (third order) bends in rectangular arch wires.</formatted_text>
    <audio_inserts count="3">
      <insert timestamp="00:57:08" confidence="4" anchor="4. Describe the adaptations in the contemporary edgewise appliance to reduce in-">

&gt; [!note] Lecturer — Straightwire Design
&gt; A straightwire appliance allows the wire to be used with no routine bends because much of the required individualization is built into the brackets and tubes. These compensations reflect differences in the position and thickness of the teeth across the arch, although individual bends may still be needed during finishing.
</insert>
      <insert timestamp="00:57:24" confidence="4" anchor="4. Describe the adaptations in the contemporary edgewise appliance to reduce in-">

&gt; [!note] Lecturer — First-Order Compensation
&gt; First-order bends compensate for differences in the buccolingual position of the teeth. In a parabolic arch, the distance between the wire and the brackets changes across the arch, so the bracket base or molar tube incorporates features such as a lateral-incisor inset and canine and first-molar offsets.
</insert>
      <insert timestamp="00:59:25" confidence="4" anchor="5. Describe the adaptations in the contemporary edgewise appliance to reduce ang">

&gt; [!note] Lecturer — Second-Order Angulation
&gt; Second-order bends relate to the mesiodistal inclination of teeth, and the corresponding angulation is incorporated into the bracket system. The bracket slot therefore contains a specific angulation rather than zero angulation, although finishing adjustments remain necessary when the standard value is not exact for an individual patient.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="580,477,864,775" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L3 3A Level III UnitA(1)_figures/img_9549eb34d25062c7.webp" caption="The Straight-Wire Appliance">
        <description>A clinical photograph of a dental model showing the upper and lower arches fitted with fixed orthodontic appliances. Metal brackets are bonded to the facial surface of each tooth, connected by a continuous archwire that runs straight across without bends or loops.</description>
      </img>
    </images>
  </page>
  <page number="55">
    <text>4. Describe the adaptations in the contemporary edgewise appliance to reduce in-out (first order) bends in arch wires.

THE UNIVERSITY OF WESTERN AUSTRALIA

### Precise In/Out Measurements

55

![](L3 3A Level III UnitA(1)_figures/img_5ecf6c3e4f3096a0.webp)
![](L3 3A Level III UnitA(1)_figures/img_3bbcea6741623110.webp)</text>
    <formatted_text>4. Describe the adaptations in the contemporary edgewise appliance to reduce in-out (first order) bends in arch wires.

#### Precise In/Out Measurements</formatted_text>
    <images>
      <img order="0" bbox="67,343,472,989" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L3 3A Level III UnitA(1)_figures/img_5ecf6c3e4f3096a0.webp">
        <description>A diagram showing an occlusal view of a dental arch with a curved archwire passing through the teeth. Arrows indicate specific measurements in millimeters at various points along the wire, labeled from left to right as 2.1 MM, 1.6 MM, 2.5 MM, 2.4 MM, 2.5 MM, 2.9 MM, and 2.9 MM.</description>
      </img>
      <img order="1" bbox="584,333,975,989" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L3 3A Level III UnitA(1)_figures/img_3bbcea6741623110.webp">
        <description>A schematic diagram of a dental arch showing an archwire curve with arrows pointing to specific teeth. Each arrow is labelled with a measurement in millimeters (1.2 MM, 1.9 MM, 2.35 MM, and 2.5 MM), illustrating the precise in/out positioning values along the wire.</description>
      </img>
    </images>
  </page>
  <page number="56">
    <text>4. Describe the adaptations in the contemporary edgewise appliance to reduce in-out (first order) bends in arch wires.

56

![In/Out 7x7](L3 3A Level III UnitA(1)_figures/img_7033044416270dc1.webp)</text>
    <formatted_text>4. Describe the adaptations in the contemporary edgewise appliance to reduce in-out (first order) bends in arch wires.</formatted_text>
    <images>
      <img order="0" bbox="36,217,893,989" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L3 3A Level III UnitA(1)_figures/img_7033044416270dc1.webp" caption="In/Out 7x7">
        <description>A clinical photograph of a dental arch model with fixed orthodontic appliances (brackets and an archwire) bonded to the teeth. The image is labeled 'In/Out 7x7' at the top, illustrating the concept of in-out tooth positioning or first-order bends in the context of edgewise appliance mechanics.</description>
      </img>
    </images>
  </page>
  <page number="57">
    <text>5. Describe the adaptations in the contemporary edgewise appliance to reduce angulation (second order) bends in arch wires.

THE UNIVERSITY OF
WESTERN
AUSTRALIA

Standard Angulations

90°
5° 5° 2° 2° 11° 9° 5°

2° 2° 2° 2° 5° 2° 2°
90°

57</text>
    <formatted_text>5. Describe the adaptations in the contemporary edgewise appliance to reduce angulation (second order) bends in arch wires.

#### Standard Angulations

- 90°
- 5° 5° 2° 2° 11° 9° 5°
- 2° 2° 2° 2° 5° 2° 2°
- 90°</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:48:17" confidence="5" anchor="- 90° - 5° 5° 2° 2° 11° 9° 5° - 2° 2° 2° 2° 5° 2° 2° - 90°">

&gt; [!note] Lecturer — Third-Order Torque
&gt; Third-order bends control the rotational relationship between the tooth and rectangular archwire. Torque can be added by twisting the archwire or built into the bracket; rectangular wires are needed because round wires cannot adequately engage the slot to control torque.
&gt;
&gt; - Different rectangular wire sizes provide different levels of engagement and torque control.
&gt; - The amount of torque is individualized according to the type of tooth, its anchorage, and the desired movement.
&gt; - Straightwire brackets incorporate third-order torque, although case-specific finishing bends may still be required.
</insert>
    </audio_inserts>
  </page>
  <page number="58">
    <text>6. Describe the adaptations in the contemporary edgewise appliance to reduce torque (third order) bends in rectangular arch wires.

THE UNIVERSITY OF
WESTERN
AUSTRALIA

-9° -9° -7° -7° -7° +3° +7° 90°

-35° -30° -22° -17° -11° -1° -1° 90°

58

![Standard Inclination](L3 3A Level III UnitA(1)_figures/img_61d048ab75d56edc.webp)</text>
    <formatted_text>6. Describe the adaptations in the contemporary edgewise appliance to reduce torque (third order) bends in rectangular arch wires.

- -9° -9° -7° -7° -7° +3° +7° 90°
- -35° -30° -22° -17° -11° -1° -1° 90°</formatted_text>
    <images>
      <img order="0" bbox="55,220,954,991" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L3 3A Level III UnitA(1)_figures/img_61d048ab75d56edc.webp" caption="Standard Inclination">
        <description>Two rows of anatomical tooth illustrations (upper row showing crowns, lower row showing roots) with superimposed vertical and angled reference lines to demonstrate specific degree values. The image illustrates the concept of 'Standard Inclination' for teeth, likely representing mesiodistal tip or torque angles used in orthodontic bracket prescription.</description>
      </img>
    </images>
  </page>
  <page number="59">
    <text>Third Order

First order

TOOTH

59

![](L3 3A Level III UnitA(1)_figures/img_a34b0ad25ad79594.webp)</text>
    <formatted_text>Third Order

First order

TOOTH</formatted_text>
    <images>
      <img order="0" bbox="2,0,1000,870" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L3 3A Level III UnitA(1)_figures/img_a34b0ad25ad79594.webp">
        <description>A schematic diagram illustrating the geometric classification of curves (orders) applied to a dental arch or tooth alignment. It features a white outline shape on a dark background, with red dots marking specific points labeled 'Third Order' and 'First order', alongside a large curve labeled 'TOOTH'.</description>
      </img>
    </images>
  </page>
  <page number="60" origin="cases">
    <text>## Case: Histological micrographs of PDL necrosis and undermining resorption

### Question

**Scenario:** Histological micrographs are presented to illustrate the tissue response of the periodontal ligament (PDL) and alveolar bone to heavy orthodontic forces.

**What's shown:** Tissue sections showing the PDL and bone, with specific inking highlighting areas of pressure, squished PDL tissue, and bone resorption.

**Consider:** Identify the histological features visible in the micrographs and explain how they relate to the biological response to heavy orthodontic force.


### Answer

**Observations:**
- Specific inking highlights an area where blood vessels have been completely shut off due to heavy pressure.
- The PDL is completely squished with no viable cells remaining.
- Undermining resorption of the adjacent bone is visible.

**Reasoning:** Heavy orthodontic pressure causes a total shut-off of blood flow, leading to sterile necrosis (hyalinization) of the PDL. Because the differentiated cells within the PDL are destroyed, direct bone resorption cannot occur. Instead, cells must be recruited from the bone itself to perform undermining resorption, which takes significantly more time and delays tooth movement.

**Takeaway:** Heavy orthodontic forces can cause sterile necrosis (hyalinization) of the PDL due to blood vessel shut-off, necessitating undermining resorption and significantly delaying tooth movement; therefore, force levels must be carefully controlled to prevent this.

## Case: Removable appliance design for anterior crossbite

### Question

**Scenario:** A removable orthodontic appliance is presented as an example of correct appliance design to illustrate its components and biomechanics.

**What's shown:** A removable appliance featuring an acrylic plate, various clasps, and a spring positioned underneath the acrylic.

**Consider:** Identify the components of the appliance, explain how it achieves its corrective effect and retention, and describe the material and activation of the spring.


### Answer

**Observations:**
- The appliance includes an Adams clasp, a ball clasp, and a Hawley-type clasp.
- A finger spring with two helices is located underneath the acrylic plate.
- The spring is fabricated from 0.6 or 0.7 mm stainless steel wire.
- The device is designed to correct an anterior crossbite of a central incisor.

**Reasoning:**
- The spring applies the corrective force when activated by pulling the wire down onto the cervical part of the incisor.
- Stainless steel is used instead of NiTi because it can be bent to achieve the required design and provides the resilience needed to release a more constant force over time.
- Retention is achieved by the clasps engaging the teeth (e.g., the Adams clasp typically engages the first molars, while a lab bow clasp engages the canines and central incisors) to keep the plate in position against the active force of the spring.
- If a patient has an increased overjet with flared incisors, the lab bow can be activated to retrocline them, provided the posterior retention is adequately balanced so the plate does not dislodge during function.

**Outcome:**
- The patient is reviewed every second week to reactivate the spring.

**Takeaway:**
- When designing a removable appliance, the active force generated by the spring must be carefully balanced with adequate retention from the clasps to ensure the device remains securely in place during function.</text>
    <formatted_text>## Case: Histological micrographs of PDL necrosis and undermining resorption

### Question

**Scenario:** Histological micrographs are presented to illustrate the tissue response of the periodontal ligament (PDL) and alveolar bone to heavy orthodontic forces.

**What's shown:** Tissue sections showing the PDL and bone, with specific inking highlighting areas of pressure, squished PDL tissue, and bone resorption.

**Consider:** Identify the histological features visible in the micrographs and explain how they relate to the biological response to heavy orthodontic force.


![](L3 3A Level III UnitA(1)_cases_attachments/img_70d93c0d162d2a29.webp)
![](L3 3A Level III UnitA(1)_cases_attachments/img_0b8e7bb169b98662.webp)
![](L3 3A Level III UnitA(1)_cases_attachments/img_4deefd6993f1c742.webp)
### Answer

**Observations:**
- Specific inking highlights an area where blood vessels have been completely shut off due to heavy pressure.
- The PDL is completely squished with no viable cells remaining.
- Undermining resorption of the adjacent bone is visible.

**Reasoning:** Heavy orthodontic pressure causes a total shut-off of blood flow, leading to sterile necrosis (hyalinization) of the PDL. Because the differentiated cells within the PDL are destroyed, direct bone resorption cannot occur. Instead, cells must be recruited from the bone itself to perform undermining resorption, which takes significantly more time and delays tooth movement.

**Takeaway:** Heavy orthodontic forces can cause sterile necrosis (hyalinization) of the PDL due to blood vessel shut-off, necessitating undermining resorption and significantly delaying tooth movement; therefore, force levels must be carefully controlled to prevent this.

## Case: Removable appliance design for anterior crossbite

### Question

**Scenario:** A removable orthodontic appliance is presented as an example of correct appliance design to illustrate its components and biomechanics.

**What's shown:** A removable appliance featuring an acrylic plate, various clasps, and a spring positioned underneath the acrylic.

**Consider:** Identify the components of the appliance, explain how it achieves its corrective effect and retention, and describe the material and activation of the spring.


![](L3 3A Level III UnitA(1)_cases_attachments/img_5a3df756b8ca3ce3.webp)
![](L3 3A Level III UnitA(1)_cases_attachments/img_90a38924bc857a98.webp)
### Answer

**Observations:**
- The appliance includes an Adams clasp, a ball clasp, and a Hawley-type clasp.
- A finger spring with two helices is located underneath the acrylic plate.
- The spring is fabricated from 0.6 or 0.7 mm stainless steel wire.
- The device is designed to correct an anterior crossbite of a central incisor.

**Reasoning:**
- The spring applies the corrective force when activated by pulling the wire down onto the cervical part of the incisor.
- Stainless steel is used instead of NiTi because it can be bent to achieve the required design and provides the resilience needed to release a more constant force over time.
- Retention is achieved by the clasps engaging the teeth (e.g., the Adams clasp typically engages the first molars, while a lab bow clasp engages the canines and central incisors) to keep the plate in position against the active force of the spring.
- If a patient has an increased overjet with flared incisors, the lab bow can be activated to retrocline them, provided the posterior retention is adequately balanced so the plate does not dislodge during function.

**Outcome:**
- The patient is reviewed every second week to reactivate the spring.

**Takeaway:**
- When designing a removable appliance, the active force generated by the spring must be carefully balanced with adequate retention from the clasps to ensure the device remains securely in place during function.</formatted_text>
    <heading_path>Case: Histological micrographs of PDL necrosis and undermining resorption</heading_path>
    <images>
      <img order="0" type="photo" path="L3 3A Level III UnitA(1)_figures/img_70d93c0d162d2a29.webp" media="frame" source="slide" page="15" timestamp="00:14:49">
        <description>A photomicrograph of a histological tissue section showing distinct cross-sections of tubular structures, likely blood vessels or ducts, embedded within a fibrous stroma. The image features prominent staining with deep red regions in the upper left and blue-green tones outlining the concentric layers of the central circular structure.</description>
      </img>
      <img order="1" type="photo" path="L3 3A Level III UnitA(1)_figures/img_0b8e7bb169b98662.webp" media="frame" source="slide" page="16" timestamp="00:15:07">
        <description>PDL Necrotic No viable cells A histological micrograph showing tissue sections with distinct staining, featuring a diagonal band of orange-stained fibrous tissue separating dark blue cellular regions from pale yellow areas. The image includes annotations identifying specific features such as necrotic periodontal ligament (PDL) and cells originating from trabeculae.</description>
      </img>
      <img order="2" type="photo" path="L3 3A Level III UnitA(1)_figures/img_4deefd6993f1c742.webp" media="frame" source="slide" page="17" timestamp="00:15:50">
        <description>A histological micrograph showing a section of bone tissue with distinct staining. A blue arrow labeled &quot;Cells from trabeculae&quot; points to cellular structures within the bone matrix, while red text indicates an area of &quot;Undermining resorption&quot; where cells appear to be eroding the bone surface.</description>
      </img>
      <img order="3" type="photo" path="L3 3A Level III UnitA(1)_figures/img_5a3df756b8ca3ce3.webp" media="frame" source="slide" page="34" timestamp="00:29:48">
        <description>b Clinical photograph showing an occlusal view of a maxillary dental cast fitted with a removable orthodontic appliance. The appliance features a wire framework extending from the anterior region across the palate to clasps on the posterior teeth, consistent with a Crozat design.</description>
      </img>
      <img order="4" type="photo" path="L3 3A Level III UnitA(1)_figures/img_90a38924bc857a98.webp" media="frame" source="slide" page="35" timestamp="00:33:39">
        <description>Clinical photograph of an active Hawley type orthodontic appliance mounted on a dental cast. The image shows the yellow acrylic baseplate and various stainless steel wire components, including clasps and springs.</description>
      </img>
    </images>
  </page>
  <footnotes>[^1]: Original PDF page 1: [[L3 3A Level III UnitA(1).pdf#page=1|L3 3A Level III UnitA(1), p.1]]
[^2]: Original PDF page 2: [[L3 3A Level III UnitA(1).pdf#page=2|L3 3A Level III UnitA(1), p.2]]
[^3]: Original PDF page 3: [[L3 3A Level III UnitA(1).pdf#page=3|L3 3A Level III UnitA(1), p.3]]
[^4]: Original PDF page 4: [[L3 3A Level III UnitA(1).pdf#page=4|L3 3A Level III UnitA(1), p.4]]
[^5]: Original PDF page 5: [[L3 3A Level III UnitA(1).pdf#page=5|L3 3A Level III UnitA(1), p.5]]
[^6]: Original PDF page 6: [[L3 3A Level III UnitA(1).pdf#page=6|L3 3A Level III UnitA(1), p.6]]
[^7]: Original PDF page 7: [[L3 3A Level III UnitA(1).pdf#page=7|L3 3A Level III UnitA(1), p.7]]
[^8]: Original PDF page 8: [[L3 3A Level III UnitA(1).pdf#page=8|L3 3A Level III UnitA(1), p.8]]
[^9]: Original PDF page 9: [[L3 3A Level III UnitA(1).pdf#page=9|L3 3A Level III UnitA(1), p.9]]
[^10]: Original PDF page 10: [[L3 3A Level III UnitA(1).pdf#page=10|L3 3A Level III UnitA(1), p.10]]
[^11]: Original PDF page 11: [[L3 3A Level III UnitA(1).pdf#page=11|L3 3A Level III UnitA(1), p.11]]
[^12]: Original PDF page 12: [[L3 3A Level III UnitA(1).pdf#page=12|L3 3A Level III UnitA(1), p.12]]
[^13]: Original PDF page 13: [[L3 3A Level III UnitA(1).pdf#page=13|L3 3A Level III UnitA(1), p.13]]
[^14]: Original PDF page 14: [[L3 3A Level III UnitA(1).pdf#page=14|L3 3A Level III UnitA(1), p.14]]
[^15]: Original PDF page 15: [[L3 3A Level III UnitA(1).pdf#page=15|L3 3A Level III UnitA(1), p.15]]
[^16]: Original PDF page 16: [[L3 3A Level III UnitA(1).pdf#page=16|L3 3A Level III UnitA(1), p.16]]
[^17]: Original PDF page 17: [[L3 3A Level III UnitA(1).pdf#page=17|L3 3A Level III UnitA(1), p.17]]
[^18]: Original PDF page 18: [[L3 3A Level III UnitA(1).pdf#page=18|L3 3A Level III UnitA(1), p.18]]
[^19]: Original PDF page 19: [[L3 3A Level III UnitA(1).pdf#page=19|L3 3A Level III UnitA(1), p.19]]
[^20]: Original PDF page 20: [[L3 3A Level III UnitA(1).pdf#page=20|L3 3A Level III UnitA(1), p.20]]
[^21]: Original PDF page 21: [[L3 3A Level III UnitA(1).pdf#page=21|L3 3A Level III UnitA(1), p.21]]
[^22]: Original PDF page 22: [[L3 3A Level III UnitA(1).pdf#page=22|L3 3A Level III UnitA(1), p.22]]
[^23]: Original PDF page 23: [[L3 3A Level III UnitA(1).pdf#page=23|L3 3A Level III UnitA(1), p.23]]
[^24]: Original PDF page 24: [[L3 3A Level III UnitA(1).pdf#page=24|L3 3A Level III UnitA(1), p.24]]
[^25]: Original PDF page 25: [[L3 3A Level III UnitA(1).pdf#page=25|L3 3A Level III UnitA(1), p.25]]
[^26]: Original PDF page 26: [[L3 3A Level III UnitA(1).pdf#page=26|L3 3A Level III UnitA(1), p.26]]
[^27]: Original PDF page 27: [[L3 3A Level III UnitA(1).pdf#page=27|L3 3A Level III UnitA(1), p.27]]
[^28]: Original PDF page 28: [[L3 3A Level III UnitA(1).pdf#page=28|L3 3A Level III UnitA(1), p.28]]
[^29]: Original PDF page 29: [[L3 3A Level III UnitA(1).pdf#page=29|L3 3A Level III UnitA(1), p.29]]
[^30]: Original PDF page 30: [[L3 3A Level III UnitA(1).pdf#page=30|L3 3A Level III UnitA(1), p.30]]
[^31]: Original PDF page 31: [[L3 3A Level III UnitA(1).pdf#page=31|L3 3A Level III UnitA(1), p.31]]
[^32]: Original PDF page 32: [[L3 3A Level III UnitA(1).pdf#page=32|L3 3A Level III UnitA(1), p.32]]
[^33]: Original PDF page 33: [[L3 3A Level III UnitA(1).pdf#page=33|L3 3A Level III UnitA(1), p.33]]
[^34]: Original PDF page 34: [[L3 3A Level III UnitA(1).pdf#page=34|L3 3A Level III UnitA(1), p.34]]
[^35]: Original PDF page 35: [[L3 3A Level III UnitA(1).pdf#page=35|L3 3A Level III UnitA(1), p.35]]
[^36]: Original PDF page 36: [[L3 3A Level III UnitA(1).pdf#page=36|L3 3A Level III UnitA(1), p.36]]
[^37]: Original PDF page 37: [[L3 3A Level III UnitA(1).pdf#page=37|L3 3A Level III UnitA(1), p.37]]
[^38]: Original PDF page 38: [[L3 3A Level III UnitA(1).pdf#page=38|L3 3A Level III UnitA(1), p.38]]
[^39]: Original PDF page 39: [[L3 3A Level III UnitA(1).pdf#page=39|L3 3A Level III UnitA(1), p.39]]
[^40]: Original PDF page 40: [[L3 3A Level III UnitA(1).pdf#page=40|L3 3A Level III UnitA(1), p.40]]
[^41]: Original PDF page 41: [[L3 3A Level III UnitA(1).pdf#page=41|L3 3A Level III UnitA(1), p.41]]
[^42]: Original PDF page 42: [[L3 3A Level III UnitA(1).pdf#page=42|L3 3A Level III UnitA(1), p.42]]
[^43]: Original PDF page 43: [[L3 3A Level III UnitA(1).pdf#page=43|L3 3A Level III UnitA(1), p.43]]
[^44]: Original PDF page 44: [[L3 3A Level III UnitA(1).pdf#page=44|L3 3A Level III UnitA(1), p.44]]
[^45]: Original PDF page 45: [[L3 3A Level III UnitA(1).pdf#page=45|L3 3A Level III UnitA(1), p.45]]
[^46]: Original PDF page 46: [[L3 3A Level III UnitA(1).pdf#page=46|L3 3A Level III UnitA(1), p.46]]
[^47]: Original PDF page 47: [[L3 3A Level III UnitA(1).pdf#page=47|L3 3A Level III UnitA(1), p.47]]
[^48]: Original PDF page 48: [[L3 3A Level III UnitA(1).pdf#page=48|L3 3A Level III UnitA(1), p.48]]
[^49]: Original PDF page 49: [[L3 3A Level III UnitA(1).pdf#page=49|L3 3A Level III UnitA(1), p.49]]
[^50]: Original PDF page 50: [[L3 3A Level III UnitA(1).pdf#page=50|L3 3A Level III UnitA(1), p.50]]
[^51]: Original PDF page 51: [[L3 3A Level III UnitA(1).pdf#page=51|L3 3A Level III UnitA(1), p.51]]
[^52]: Original PDF page 52: [[L3 3A Level III UnitA(1).pdf#page=52|L3 3A Level III UnitA(1), p.52]]
[^53]: Original PDF page 53: [[L3 3A Level III UnitA(1).pdf#page=53|L3 3A Level III UnitA(1), p.53]]
[^54]: Original PDF page 54: [[L3 3A Level III UnitA(1).pdf#page=54|L3 3A Level III UnitA(1), p.54]]
[^55]: Original PDF page 55: [[L3 3A Level III UnitA(1).pdf#page=55|L3 3A Level III UnitA(1), p.55]]
[^56]: Original PDF page 56: [[L3 3A Level III UnitA(1).pdf#page=56|L3 3A Level III UnitA(1), p.56]]
[^57]: Original PDF page 57: [[L3 3A Level III UnitA(1).pdf#page=57|L3 3A Level III UnitA(1), p.57]]
[^58]: Original PDF page 58: [[L3 3A Level III UnitA(1).pdf#page=58|L3 3A Level III UnitA(1), p.58]]
[^59]: Original PDF page 59: [[L3 3A Level III UnitA(1).pdf#page=59|L3 3A Level III UnitA(1), p.59]]</footnotes>
</document>
