<?xml version="1.0" ?>
<document version="1.8" entity_encoding="single">
  <page number="1">
    <text>Growth and Development
Level IV Unit A, B &amp; C

THE UNIVERSITY OF
WESTERN
AUSTRALIA

**Treatment Timing and**
**Extractions**</text>
    <formatted_text>Growth and Development — Level IV Unit A, B &amp; C

The University of Western Australia</formatted_text>
  </page>
  <page number="2">
    <text>When should a child start
orthodontic treatment?

THE UNIVERSITY OF
WESTERN
AUSTRALIA

Depends on the malocclusion

1. **Class I**
2. **Class II**
3. **Class III**
4. **Posterior x-bites**
5. **Impacted canines**</text>
    <formatted_text>Depends on the malocclusion:

1. Class I
2. Class II
3. Class III
4. Posterior x-bites
5. Impacted canines</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:53:17" confidence="3" anchor="Depends on the malocclusion:  1. Class I 2. Class II 3. Class III 4. Posterior x">

&gt; [!note] Lecturer — Treatment Timing
&gt; Treatment timing also depends on the amount of crowding, the skeletal cause of the malocclusion, the stage of dental development, the patient’s growth status, and psychological or quality-of-life concerns.
&gt;
&gt; - Treatment should not begin merely because the patient or parents are concerned; timing must allow the orthodontist to bond the necessary teeth and use developmental space effectively.
</insert>
    </audio_inserts>
  </page>
  <page number="3">
    <text>Class I crowding and protrusion

THE UNIVERSITY OF
WESTERN
AUSTRALIA

• Mild crowding or spacing?
– Treatment should start in the permanent dentition
– Why?

• Moderate to Severe crowding?
– When the primary 2nd molars are ready to exfoliate (late mixed dentition)
– Why?
• So we can use the leeway space to alleviate crowding

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_2675a183f77ead8a.webp)
![](L9.2 Level IV UnitB,C and treatment timing_figures/img_8fbbf88a1525af68.webp)</text>
    <formatted_text>- Mild crowding or spacing?
  - Treatment should start in the permanent dentition
  - Why?
- Moderate to severe crowding?
  - When the primary 2nd molars are ready to exfoliate (late mixed dentition)
  - Why?
    - So we can use the leeway space to alleviate crowding</formatted_text>
    <audio_inserts count="2">
      <insert timestamp="00:02:52" confidence="5" anchor="- Mild crowding or spacing?   - Treatment should start in the permanent dentitio">

&gt; [!note] Lecturer — Mild Crowding
&gt; Mild crowding can often be managed later without extractions. Three to four millimeters of space, and sometimes up to five millimeters, may be managed with limited expansion, interproximal reduction, or other minor space-management procedures; bonding before the canines erupt may leave treatment incomplete because not all teeth can be included.
</insert>
      <insert timestamp="00:04:40" confidence="3" anchor="- Moderate to severe crowding?   - When the primary 2nd molars are ready to exfo">

&gt; [!note] Lecturer — Leeway Space Timing
&gt; An OPG can be used to assess premolar development. When approximately two-thirds of the premolar roots have developed, the premolars are beginning to erupt and resorb the primary molar roots; this is the time to consider placing a lingual arch, before premolar eruption or mesial drift of the permanent molars causes the opportunity to be lost.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="665,243,989,547" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_2675a183f77ead8a.webp">
        <description>Clinical intraoral photograph showing an occlusal view of the mandibular dental arch. The image displays the lower teeth arranged in a U-shape with visible crowding and misalignment of the anterior incisors.</description>
      </img>
      <img order="1" bbox="664,609,989,909" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_8fbbf88a1525af68.webp">
        <description>Clinical intraoral photograph showing the mandibular dental arch from an occlusal view. The image illustrates anterior crowding and misalignment of the lower incisors, consistent with the slide's topic of Class I crowding.</description>
      </img>
    </images>
  </page>
  <page number="4">
    <text>Class I crowding and protrusion

THE UNIVERSITY OF
WESTERN
AUSTRALIA

• **Severe crowding?**
  - Depends on the severity
  - Early treatment with serial extraction is an option

If you see more than 7mm of crowding in the mixed dentition, refer to orthodontist</text>
    <formatted_text>- Severe crowding?
  - Depends on the severity
  - Early treatment with serial extraction is an option

&gt; If you see more than 7mm of crowding in the mixed dentition, refer to orthodontist</formatted_text>
  </page>
  <page number="5">
    <text>What are the guidelines for serial extraction?

THE UNIVERSITY OF WESTERN AUSTRALIA

*   &gt;10 mm of crowding in both arches
*   Normal facial proportions (Class I with good vertical thirds)
*   Phase 2 treatment will likely be needed
    *   Why?
        *   Alignment is improved but not perfect
        *   Some extraction space remains
        *   Overbite is usually increased</text>
    <formatted_text>- &gt;10 mm of crowding in both arches
- Normal facial proportions (Class I with good vertical thirds)
- Phase 2 treatment will likely be needed
  - Why?
    - Alignment is improved but not perfect
    - Some extraction space remains
    - Overbite is usually increased</formatted_text>
    <audio_inserts count="3">
      <insert timestamp="00:11:41" confidence="5" anchor="- Phase 2 treatment will likely be needed   - Why?     - Alignment is improved b">

&gt; [!note] Lecturer — Serial Extraction Follow-up
&gt; Serial extraction does not complete orthodontic treatment. A second phase may be needed to close residual spaces, correct tooth inclinations, establish parallel roots, and improve the canine relationship; the canines and premolars may erupt convergently or with residual space remaining.
</insert>
      <insert timestamp="00:13:43" confidence="2" anchor="How would we perform serial extraction? (Sequence of extraction)  SEEK WISDOM">
- ==A typical sequence is to extract the primary canines, then the primary first molars, then the primary second molars, and finally the first premolars when their roots are sufficiently developed and they are ready to erupt.==</insert>
      <insert timestamp="00:10:52" confidence="4" anchor="- Refer to an orthodontist and let them make that decision for you  What will ha">

&gt; [!note] Lecturer — Serial Extraction Candidates
&gt; Serial extraction is most appropriate for severe crowding with a Class I relationship, normal facial proportions, a normal overbite, and a vertically balanced facial pattern.
&gt;
&gt; - A deep overbite is unfavorable because extraction treatment can produce counterclockwise mandibular rotation and worsen the overbite.
&gt; - The extraction should solve crowding without removing so much space that the molars cannot be managed in a Class I relationship.
</insert>
    </audio_inserts>
  </page>
  <page number="6">
    <text># How would we perform serial extraction??
(Sequence of extraction)</text>
    <formatted_text>How would we perform serial extraction? (Sequence of extraction)</formatted_text>
  </page>
  <page number="7">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA
SEEK WISDOM

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_b4d859ac5bfc1abe.webp)</text>
    <formatted_text>SEEK WISDOM</formatted_text>
    <images>
      <img order="0" bbox="1,218,996,999" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_b4d859ac5bfc1abe.webp">
        <description>Clinical photo: A side-by-side comparison showing the frontal and profile facial views of a child with curly hair. The images illustrate specific facial features, including an open mouth posture in the frontal view and a convex profile with lips parted in the lateral view.</description>
      </img>
    </images>
  </page>
  <page number="8">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA

**What do you see?**</text>
    <formatted_text>What do you see?</formatted_text>
  </page>
  <page number="9">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA
**What do you see?**

![What do you see?](L9.2 Level IV UnitB,C and treatment timing_figures/img_14d722fb408087c8.webp)</text>
    <formatted_text>What do you see?</formatted_text>
    <images>
      <img order="0" bbox="217,0,777,998" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_14d722fb408087c8.webp" caption="What do you see?">
        <description>This clinical photograph displays an occlusal view of the maxillary and mandibular dental arches. The image highlights the arrangement of the teeth, including incisors, canines, premolars, and molars, as well as the hard palate with visible rugae.</description>
      </img>
    </images>
  </page>
  <page number="10">
    <text># Is she a good candidate for serial extraction?

THE UNIVERSITY OF WESTERN AUSTRALIA

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_33931db03dcf8038.webp)</text>
    <formatted_text>Is she a good candidate for serial extraction?</formatted_text>
    <images>
      <img order="0" bbox="3,237,1000,903" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="figure" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_33931db03dcf8038.webp">
        <description>A panoramic dental radiograph showing the full dentition, including developing permanent teeth and unerupted molars. The image displays the maxilla and mandible along with visible tooth roots and surrounding bone structure.</description>
      </img>
    </images>
  </page>
  <page number="11">
    <text>**How do you decide if serial extractions is an appropriate treatment?**

• **Refer to an orthodontist and let them make that decision for you**</text>
    <formatted_text>How do you decide if serial extractions is an appropriate treatment?

- Refer to an orthodontist and let them make that decision for you</formatted_text>
  </page>
  <page number="12">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA

**What will happen if we**
**do nothing?**
**What do you see?**
**What should be done?**

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_58b44b824d0a00e9.webp)</text>
    <formatted_text>What will happen if we do nothing?

What do you see?

What should be done?</formatted_text>
    <images>
      <img order="0" bbox="257,456,741,906" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_58b44b824d0a00e9.webp">
        <description>Clinical photograph showing an occlusal view of the lower dental arch. The image reveals several primary molars with large, dark metallic restorations (stainless steel crowns or amalgam fillings), illustrating significant tooth decay.</description>
      </img>
    </images>
  </page>
  <page number="13">
    <text># Space regaining with Partial Fixed appliances?

THE UNIVERSITY OF WESTERN AUSTRALIA

not the same patient

13

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_72e95e27731e5123.webp)</text>
    <formatted_text>Space regaining with partial fixed appliances?

*Not the same patient*</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:29:06" confidence="4" anchor="Space regaining with partial fixed appliances?  *Not the same patient*">

&gt; [!note] Lecturer — Space Regaining
&gt; Space regaining should generally be limited to approximately three or four millimeters in severe serial-extraction cases. Regaining more space may make the second phase more difficult, create an unfavorable eruption pattern, or require the space to be removed again through premolar extraction.
&gt;
&gt; - When space has been lost because of premature canine loss and midline shift, a push coil on a partial fixed appliance can reopen the space and correct the lower midline deviation.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="246,444,680,843" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_72e95e27731e5123.webp">
        <description>Clinical intraoral photograph showing the mandibular arch fitted with fixed orthodontic appliances. The image displays metal brackets bonded to the lower teeth, connected by a wire secured with pink elastic ligatures, and a heavy stainless steel lingual archwire connecting the posterior molars.</description>
      </img>
    </images>
  </page>
  <page number="14">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA

*   When a mandibular primary canine is lost prematurely and the lower midline shifts, &lt;span style=&quot;color: red;&quot;&gt;consider&lt;/span&gt; extracting the contra-lateral primary canine and place a LLHA

*   OR refer to an orthodontist to make the decision.</text>
    <formatted_text>- When a mandibular primary canine is lost prematurely and the lower midline shifts, consider extracting the contra-lateral primary canine and place a LLHA
- OR refer to an orthodontist to make the decision.</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:28:52" confidence="4" anchor="- When a mandibular primary canine is lost prematurely and the lower midline shi">

&gt; [!note] Lecturer — Bilateral Canine Extraction
&gt; Bilateral extraction does not guarantee enough space for the premolars or permanent canines; its primary purpose is to distribute anterior crowding relief symmetrically and preserve the midline. If the midline shift is already established, partial braces and a push coil may be needed to reopen space and correct the deviation.
</insert>
    </audio_inserts>
  </page>
  <page number="15">
    <text>Class II Malocclusion

THE UNIVERSITY OF
WESTERN
AUSTRALIA

**When is the best time to treat these patients?**

*   Start during the adolescent growth spurt and
*   End treatment about the time growth spurt ends</text>
    <formatted_text>#### Timing of Treatment

**When is the best time to treat these patients?**

- Start during the adolescent growth spurt, and
- End treatment about the time the growth spurt ends</formatted_text>
  </page>
  <page number="16">
    <text>The UNC studies showed that
early Class II treatment was

THE UNIVERSITY OF
WESTERN
AUSTRALIA

*   No more effective than later
    treatment . . . . and . . . .

*   Considerably less efficient</text>
    <formatted_text>The UNC studies showed that early Class II treatment was:

- No more effective than later treatment . . . and . . .
- Considerably less efficient</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:31:51" confidence="5" anchor="The UNC studies showed that early Class II treatment was:  - No more effective t">

&gt; [!note] Lecturer — Growth Timing
&gt; Growth modification is most favorable around the peak of the growth spurt, specifically between cervical vertebral maturation stages CS3 and CS4.
&gt;
&gt; - The peak lasts approximately one year.
&gt; - Treatment during this period can reduce overall treatment time, maximize efficiency, reduce the cooperation required, and address the skeletal problem during a short period of favorable growth.
&gt; - Poor cooperation during this period may lengthen treatment and make the intended result more difficult to achieve.
&gt; - The North Carolina comparison found that an initial treatment phase was no more effective than one later phase and was less efficient because it increased total treatment time.
</insert>
    </audio_inserts>
  </page>
  <page number="17">
    <text>When is early treatment for Class II malocclusion indicated?

THE UNIVERSITY OF
WESTERN
AUSTRALIA

*   Psychological problems produced by teasing, etc.
*   Trauma to teeth or soft tissue
*   Severe problems</text>
    <formatted_text>**When is early treatment for Class II malocclusion indicated?**

- Psychological problems produced by teasing, etc.
- Trauma to teeth or soft tissue
- Severe problems</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:35:36" confidence="2" anchor="- Psychological problems produced by teasing, etc. - Trauma to teeth or soft tis">
- ==Significant overjet, difficulty closing the mouth, or increased trauma risk to protruding incisors==</insert>
    </audio_inserts>
  </page>
  <page number="18">
    <text>Class II growth modification

THE UNIVERSITY OF
WESTERN
AUSTRALIA

What treatment options do we have?
– Headgear
– Herbst (fixed functional appliance)
– Functional appliances
   Activator, Frankel, Twin Blocks</text>
    <formatted_text>**What treatment options do we have?**

- Headgear
- Herbst (fixed functional appliance)
- Functional appliances — Activator, Frankel, Twin Blocks</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:37:30" confidence="5" anchor="- Functional appliances — Activator, Frankel, Twin Blocks">

&gt; [!note] Lecturer — Appliance Selection
&gt; Treatment choice depends on the location of the skeletal problem.
&gt;
&gt; - When the maxilla is protrusive and the mandible is acceptable or still growing, headgear restricts forward maxillary growth while the mandible continues growing.
&gt; - When the mandible is deficient, a functional appliance postures it forward and produces remodeling and redirection of growth rather than creating new mandibular growth.
&gt; - Functional appliances may be removable, such as a twin block, or fixed, such as a Herbst appliance. In early treatment, a twin block may be suitable because the patient is not yet wearing braces.
</insert>
    </audio_inserts>
  </page>
  <page number="19">
    <text>The University of Western Australia

**Does headgear work?**

**Mandibular Growth**

**STOP**

Headgear restricts the growth of the maxilla and allows the differential mandible growth to catch up</text>
    <formatted_text>**Does headgear work?**

**Mandibular Growth — STOP**

Headgear restricts the growth of the maxilla and allows the differential mandibular growth to catch up.</formatted_text>
    <audio_inserts count="2">
      <insert timestamp="00:38:50" confidence="2" anchor="Headgear restricts the growth of the maxilla and allows the differential mandibu">

&gt; [!note] Lecturer — Headgear Effects
&gt; Headgear can produce a substantial improvement in overjet even without braces, with the most favorable results expected when it is used around the growth peak.
</insert>
      <insert timestamp="00:37:56" confidence="6" anchor="Headgear treatment  Herbst treatment (fixed functional appliance)  How does it w">

&gt; [!note] Lecturer — Herbst Mechanics
&gt; The Herbst appliance holds the mandible forward using pistons that connect the upper molar region to the lower jaw.
&gt;
&gt; - It produces remodeling in the anterior part of the glenoid fossa and redirects growth rather than creating growth.
&gt; - Changes may include forward mandibular positioning, condylar remodeling, and some lower incisor proclination.
&gt; - The described case showed primarily anteroposterior correction without substantial vertical mandibular rotation.
</insert>
    </audio_inserts>
  </page>
  <page number="20">
    <text>Headgear treatment

THE UNIVERSITY OF
WESTERN
AUSTRALIA
SEEK WISDOM

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_1463eecfa4c651cf.webp)
![](L9.2 Level IV UnitB,C and treatment timing_figures/img_65f59edc70deef67.webp)</text>
    <formatted_text>Headgear treatment</formatted_text>
    <images>
      <img order="0" bbox="3,208,1000,1000" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_1463eecfa4c651cf.webp">
        <description>Clinical photo: A four-panel composite showing lateral facial profiles (top) and intraoral buccal views of the dentition (bottom). The images illustrate a comparison between two states, likely before and after treatment, with brown circles obscuring the patients' eyes.</description>
      </img>
      <img order="1" bbox="510,218,859,1000" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_65f59edc70deef67.webp">
        <description>Clinical photo: A composite image showing a lateral facial profile of a patient with the lips parted and tongue protruding, positioned above an intraoral view revealing mixed dentition with significant crowding and spacing.</description>
      </img>
    </images>
  </page>
  <page number="21">
    <text>Herbst treatment
(fixed functional appliance)

How does it work?

![Herbst treatment (fixed functional appliance) How does it work?](L9.2 Level IV UnitB,C and treatment timing_figures/img_a6714574903bfb37.webp)</text>
    <formatted_text>Herbst treatment (fixed functional appliance)

How does it work?</formatted_text>
    <images>
      <img order="0" bbox="0,14,999,991" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_a6714574903bfb37.webp" caption="Herbst treatment (fixed functional appliance) How does it work?">
        <description>A composite image showing the results of Herbst treatment, featuring lateral facial profiles (before and after) with eyes obscured, a close-up of the metal appliance mechanism attached to teeth, and intraoral views of dental occlusion.</description>
      </img>
    </images>
  </page>
  <page number="22">
    <text>**What changes do you see?**

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_c40ff7cc47bc8e1c.webp)</text>
    <formatted_text>**What changes do you see?**</formatted_text>
    <images>
      <img order="0" bbox="148,30,974,820" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="diagram" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_c40ff7cc47bc8e1c.webp">
        <description>A line drawing diagram illustrating the skeletal changes associated with orthognathic surgery, specifically a Le Fort I osteotomy. The image depicts the maxilla being repositioned relative to the mandible and cranial base, using red outlines to show the movement or 'changes' in the dental arches and jaw relationship.</description>
      </img>
    </images>
  </page>
  <page number="23">
    <text>Class III Malocclusion

THE UNIVERSITY OF WESTERN AUSTRALIA

What are the different forms of skeletal Class III malocclusion?

Retrusive Maxilla

Prognathic Mandible

Combination Maxilla &amp; Mandible</text>
    <formatted_text>What are the different forms of skeletal Class III malocclusion?

- Retrusive Maxilla
- Prognathic Mandible
- Combination Maxilla &amp; Mandible</formatted_text>
  </page>
  <page number="24">
    <text>Class III Retrusive Maxilla

THE UNIVERSITY OF
WESTERN
AUSTRALIA

**When do you treat/ refer?**

**Treatment is more effective if initiated during pre-adolescence (around age 7-10*)**</text>
    <formatted_text>#### When do you treat/refer?

Treatment is more effective if initiated during pre-adolescence (around age 7-10*)</formatted_text>
  </page>
  <page number="25">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA

# How do we treat this patient?

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_60c1f2114840d4a1.webp)</text>
    <formatted_text>How do we treat this patient?</formatted_text>
    <images>
      <img order="0" bbox="0,0,999,872" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_60c1f2114840d4a1.webp">
        <description>Clinical photo montage: top row shows frontal and lateral facial views of a child (eyes obscured); bottom row shows three intraoral views of the dentition, revealing spacing and alignment issues.</description>
      </img>
    </images>
  </page>
  <page number="26">
    <text>Maxillary Protraction - reverse-pull
Headgear or Protraction Facemask

THE UNIVERSITY OF
WESTERN
AUSTRALIA

Reverse Pull headgear protracts the
Maxilla and tips the teeth forward

![Reverse Pull headgear protracts the Maxilla and tips the teeth forward](L9.2 Level IV UnitB,C and treatment timing_figures/img_121867eda35e7cc4.webp)</text>
    <formatted_text>Maxillary Protraction - reverse-pull Headgear or Protraction Facemask

Reverse Pull headgear protracts the Maxilla and tips the teeth forward</formatted_text>
    <audio_inserts count="2">
      <insert timestamp="00:45:52" confidence="4" anchor="Maxillary Protraction - reverse-pull Headgear or Protraction Facemask">

&gt; [!note] Lecturer — Maxillary Protraction
&gt; Maxillary protraction is commonly combined with rapid maxillary expansion and elastics.
&gt;
&gt; - Rapid expansion opens the circummaxillary sutures before orthopedic protraction.
&gt; - Orthopedic forces of approximately 400 to 500 grams per side were described.
&gt; - The maxilla should be overcorrected to a positive overjet of approximately five to six millimeters because relapse and later mandibular growth can reduce the initial correction.
&gt; - Approximately 30% relapse was mentioned for this type of treatment.
</insert>
      <insert timestamp="00:45:26" confidence="5" anchor="Reverse Pull headgear protracts the Maxilla and tips the teeth forward">

&gt; [!note] Lecturer — Face Mask Forces
&gt; Face-mask force is applied below the center of resistance of the maxilla.
&gt;
&gt; - This can rotate the maxilla forward, produce clockwise rotation of the mandible, and increase the vertical dimension.
&gt; - The preferred age for beginning face-mask treatment was described as approximately eight years old, which is why early referral is important.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="38,209,966,880" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_121867eda35e7cc4.webp" caption="Reverse Pull headgear protracts the Maxilla and tips the teeth forward">
        <description>A composite of five clinical photographs illustrating the application and mechanics of reverse-pull headgear. The images include an extra-oral view of a child wearing a protraction facemask, an intra-oral occlusal view showing a bonded appliance with metal framework, and lateral views demonstrating the placement of hooks on molar bands for traction.</description>
      </img>
    </images>
  </page>
  <page number="27">
    <text>Class III
THE UNIVERSITY OF
WESTERN
AUSTRALIA

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_214c271b66680241.webp)
![](L9.2 Level IV UnitB,C and treatment timing_figures/img_cc74dee39dcf3b9a.webp)</text>
    <formatted_text>Class III</formatted_text>
    <images>
      <img order="0" bbox="131,302,484,868" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_214c271b66680241.webp">
        <description>Clinical profile photograph of a child showing the side view of the face and head against a blue background. A yellow vertical line is superimposed over the facial profile, likely used to assess skeletal or dental alignment relative to the soft tissue.</description>
      </img>
      <img order="1" bbox="501,302,860,867" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_cc74dee39dcf3b9a.webp">
        <description>A lateral clinical photograph of a child's head and neck, showing the facial profile against a blue background. A yellow line is drawn vertically along the front of the face to illustrate the profile line, while an oval obscures the eye area.</description>
      </img>
    </images>
  </page>
  <page number="28">
    <text># Skeletal Anchorage and Class III

THE UNIVERSITY OF
WESTERN
AUSTRALIA

*   New technique to treat Class III malocclusion
*   Most effective when initiated between ages of 10 to 13
*   Gives more favorable orthopedic changes without dentoalveolar compensation
*   No cumbersome extra-oral headgear
*   Use of skeletal anchorage and elastics</text>
    <formatted_text>- New technique to treat Class III malocclusion
- Most effective when initiated between ages of 10 to 13
- Gives more favorable orthopedic changes without dentoalveolar compensation
- No cumbersome extra-oral headgear
- Use of skeletal anchorage and elastics</formatted_text>
  </page>
  <page number="29">
    <text>ERSITY OF
TERN
RALIA

Long-term 
use of 
skeletal 
anchorage 
and elastics 
many years 
after 
correction 
completed

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_01a6c3e1c72c4dae.webp)</text>
    <formatted_text>Long-term use of skeletal anchorage and elastics many years after correction completed</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:48:38" confidence="4" anchor="Long-term use of skeletal anchorage and elastics many years after correction com">

&gt; [!note] Lecturer — Skeletal Anchorage
&gt; A screw-based approach with elastics was described as an alternative method for maxillary protraction.
&gt;
&gt; - It may provide some remodeling in the glenoid fossa, but the primary expected result is protrusion of the maxilla.
&gt; - Parents may be reluctant to accept permanent screws and elastic wear, making the approach difficult to implement in routine practice.
&gt; - Relapse was described as a significant concern.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="4,6,1000,1000" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_01a6c3e1c72c4dae.webp">
        <description>Clinical photo: A composite image featuring six intraoral photographs arranged in a grid, showing dental arches with metal skeletal anchorage devices (mini-screws or TADs) placed in the alveolar bone. Below the intraoral views are two extraoral lateral profile photographs of a young patient's face, illustrating facial aesthetics and soft tissue profiles.</description>
      </img>
    </images>
  </page>
  <page number="30">
    <text>Class III Prognathic mandible
THE UNIVERSITY OF WESTERN AUSTRALIA

**When do you treat/ refer?**
• Treatment should be delayed to late adolescence/ cessation of growth

**Why?**
– The mandible tends to grow longer
– The mandible does not stop growing at the end of the adolescent growth spurt</text>
    <formatted_text>#### When do you treat/refer?

- Treatment should be delayed to late adolescence/cessation of growth

#### Why?

- The mandible tends to grow longer
- The mandible does not stop growing at the end of the adolescent growth spurt</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:43:09" confidence="6" anchor="The mandible does not stop growing at the end of the adolescent growth spurt">

&gt; [!note] Lecturer — Late Mandibular Growth
&gt; A prognathic mandible may continue growing after the growth spurt and even into university age, and this late growth is difficult to predict.
&gt;
&gt; - A patient may finish treatment with an acceptable result and return several years later with a recurrent Class III relationship because the mandible continued growing.
&gt; - There is no reliable growth-blocking treatment described; definitive correction generally requires surgery after growth has slowed or ended.
&gt; - Follow-up uses lateral cephalometric radiographs approximately one year apart. Monitoring may continue to approximately 18 or 19 years of age for male patients and may begin somewhat earlier, around 16 years of age, for female patients.
</insert>
    </audio_inserts>
  </page>
  <page number="31">
    <text>**THE UNIVERSITY OF WESTERN AUSTRALIA**

**1 year post surgery**

**Mandibular Prognathism- the lower jaw tends to grow longer and stops growing later**</text>
    <formatted_text>1 year post surgery

Mandibular Prognathism - the lower jaw tends to grow longer and stops growing later</formatted_text>
  </page>
  <page number="32">
    <text>Crossbites
THE UNIVERSITY OF
WESTERN
AUSTRALIA
Seek Wisdom

Functional
Shift?


![What kind of a crossbite is it?](L9.2 Level IV UnitB,C and treatment timing_figures/img_77e7a480bb4893d3.webp)</text>
    <formatted_text>Functional Shift?</formatted_text>
    <images>
      <img order="0" bbox="217,156,755,578" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_77e7a480bb4893d3.webp" caption="What kind of a crossbite is it?">
        <description>A close-up clinical photograph of a child's mouth in occlusion, showing the upper and lower teeth. The image illustrates a crossbite condition where several posterior teeth are inverted relative to their opposing arch.</description>
      </img>
    </images>
  </page>
  <page number="33">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA

**Treat crossbites with**
**a function shift early**
**to eliminate the shift**

![C](L9.2 Level IV UnitB,C and treatment timing_figures/img_8d40cbcc6fbc65ca.webp)
![E](L9.2 Level IV UnitB,C and treatment timing_figures/img_f5cf0e6b79576dcd.webp)</text>
    <formatted_text>&gt; Treat crossbites with a function shift early to eliminate the shift</formatted_text>
    <images>
      <img order="0" bbox="84,278,487,611" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_8d40cbcc6fbc65ca.webp" caption="C">
        <description>Clinical photo: An intraoral frontal view of the dentition in centric occlusion, showing the upper and lower teeth meeting with visible spacing (diastemas) between several anterior teeth.</description>
      </img>
      <img order="1" bbox="85,633,489,964" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_f5cf0e6b79576dcd.webp" caption="E">
        <description>Clinical intraoral photograph showing a frontal view of the teeth in occlusion. The image displays an anterior crossbite relationship where the lower incisors are positioned labially (in front of) the upper incisors, along with visible spacing between the teeth.</description>
      </img>
    </images>
  </page>
  <page number="34">
    <text>Maxillary expansion is used to
resolve the posterior x-bite

THE UNIVERSITY OF
WESTERN
AUSTRALIA

For dental x-bites, the
treatment of choice is to expand
the arch by tipping the teeth

For skeletal x-bites, sutural
expansion is recommended

![For dental x-bites, the treatment of choice is to expand the arch by tipping the teeth](L9.2 Level IV UnitB,C and treatment timing_figures/img_c1ef6b3b97ca1c39.webp)
![For skeletal x-bites, sutural expansion is recommended](L9.2 Level IV UnitB,C and treatment timing_figures/img_618f8ef0f0a0d1e8.webp)</text>
    <formatted_text>Maxillary expansion is used to resolve the posterior x-bite.

- For dental x-bites, the treatment of choice is to expand the arch by tipping the teeth.
- For skeletal x-bites, sutural expansion is recommended.</formatted_text>
    <audio_inserts count="4">
      <insert timestamp="00:51:02" confidence="3" anchor="- For dental x-bites, the treatment of choice is to expand the arch by tipping t">
- ==A double-arch appliance can be used when the correction is primarily dental, moving the affected molars buccally rather than widening the midpalatal suture.==</insert>
      <insert timestamp="00:50:24" confidence="3" anchor="- For skeletal x-bites, sutural expansion is recommended.">

&gt; [!note] Lecturer — Functional Shift
&gt; The first question when evaluating a crossbite is whether a functional shift is present. If a shift exists, treatment should begin promptly to eliminate the shift and establish a more stable mandibular position.
</insert>
      <insert timestamp="00:54:34" confidence="3" anchor="- For skeletal x-bites, sutural expansion is recommended.">
- ==A rapid maxillary expander can address a skeletal transverse deficiency when the maxilla is significantly narrow.==</insert>
      <insert timestamp="00:51:55" confidence="3" anchor="- For skeletal x-bites, sutural expansion is recommended.">

&gt; [!note] Lecturer — Expansion Control
&gt; Encapsulation of the posterior teeth may reduce molar tipping and limit unwanted clockwise mandibular rotation, particularly in a hyperdivergent patient.
&gt;
&gt; - The goal is to transfer more of the correction to suture opening rather than dental tipping.
</insert>
    </audio_inserts>
    <images>
      <img order="0" bbox="48,301,468,718" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_c1ef6b3b97ca1c39.webp" caption="For dental x-bites, the treatment of choice is to expand the arch by tipping the teeth">
        <description>Clinical photo: Intraoral occlusal view of a maxillary dental arch fitted with a wire expansion appliance. The device consists of a central U-shaped loop and lateral arms extending along the teeth, illustrating the mechanism for tipping teeth outward to expand the arch.</description>
      </img>
      <img order="1" bbox="524,298,932,718" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_618f8ef0f0a0d1e8.webp" caption="For skeletal x-bites, sutural expansion is recommended">
        <description>Clinical photograph showing an intraoral view of a maxillary expansion appliance, specifically a Hyrax-type screw device cemented to acrylic splints covering the posterior teeth. The metal central jackscrew mechanism is positioned across the midline of the palate, illustrating the hardware used for sutural expansion.</description>
      </img>
    </images>
  </page>
  <page number="35">
    <text>Crossbite Treatment Guidelines

THE UNIVERSITY OF
WESTERN
AUSTRALIA

Class I
*   Mild crowding: Wait until the permanent dentition
*   Mod to Severe crowding: Late mixed dentition before the Es exfoliate
*   Severe Crowding: Refer to an orthodontist

Class II
*   During the adolescent growth spurt

Class III
*   Maxillary Retrusion: Pre-adolescence (7-10)
*   Mandibular Prognathism: late adolescence/ when the mand stops growing

Crossbite
*   with functional shift: Treat early to eliminate the shift
*   without functional shift: Can delay to the permanent dentition</text>
    <formatted_text>**Class I**

- Mild crowding: Wait until the permanent dentition
- Mod to Severe crowding: Late mixed dentition before the Es exfoliate
- Severe Crowding: Refer to an orthodontist

**Class II**

- During the adolescent growth spurt

**Class III**

- Maxillary Retrusion: Pre-adolescence (7-10)
- Mandibular Prognathism: late adolescence / when the mand stops growing

**Crossbite**

- With functional shift: Treat early to eliminate the shift
- Without functional shift: Can delay to the permanent dentition</formatted_text>
    <images>
      <img order="0" bbox="158,736,202,798" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="clipart">
        <description>A white double-headed arrow pointing towards the right, branching into two directions.</description>
      </img>
    </images>
  </page>
  <page number="36">
    <text>**Extractions**

THE UNIVERSITY OF
WESTERN
AUSTRALIA

*What are the two reasons for extracting teeth*
*in routine orthodontic treatment?*

– *Correction of crowding/ protrusion (Class I)*

– *Camouflage (Class II or Class III)*</text>
    <formatted_text>What are the two reasons for extracting teeth in routine orthodontic treatment?

- Correction of crowding/protrusion (Class I)
- Camouflage (Class II or Class III)</formatted_text>
  </page>
  <page number="37">
    <text>## EPIDEMIOLOGIC DATA FOR MALOCCLUSION FROM NHANES III -- KEY POINTS

- About half the population have well-aligned incisors; 15% are so crowded that extractions probably required for treatment</text>
    <formatted_text>#### Epidemiologic Data for Malocclusion from NHANES III — Key Points

- About half the population have well-aligned incisors; 15% are so crowded that extractions are probably required for treatment.</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:56:22" confidence="3" anchor="About half the population have well-aligned incisors; 15% are so crowded that ex">
- ==The lecture stated that approximately 45% of patients have a normal occlusion without significant problems, while approximately 15% have malocclusions requiring some intervention.==</insert>
    </audio_inserts>
  </page>
  <page number="38">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA
SEEK WISDOM

**How do we evaluate protrusion?**

**Why extract teeth on a non-crowded case?**</text>
    <formatted_text>&gt; How do we evaluate protrusion?
&gt;
&gt; Why extract teeth on a non-crowded case?</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="01:02:55" confidence="3" anchor="Why extract teeth on a non-crowded case?">

&gt; [!note] Lecturer — Treatment Planning
&gt; Extraction planning should consider more than intraoral occlusion. The goal is to balance facial aesthetics, occlusal stability, function, and relapse prevention; when the skeletal pattern is stable and the facial appearance improves, preserving some premolars may be preferable to extracting them solely for an ideal molar relationship.
</insert>
    </audio_inserts>
  </page>
  <page number="39">
    <text>**THE UNIVERSITY OF WESTERN AUSTRALIA**

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_9633ae228e91db91.webp)</text>
    <images>
      <img order="0" bbox="2,9,1000,991" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_9633ae228e91db91.webp">
        <description>A composite image containing four clinical photographs of a patient arranged in a grid. The top row displays left-facing lateral profiles, while the bottom row shows frontal views; the eyes are obscured by peach-colored ovals for anonymity.</description>
      </img>
    </images>
  </page>
  <page number="40">
    <text>**Class II Camouflage**

THE UNIVERSITY OF
WESTERN
AUSTRALIA

**What does camouflage mean?**
*To correct the malocclusion while making the underlying skeletal problem less apparent*

**How do we camouflage a Class II skeletal malocclusion?**
*Extractions*
  *U4s – for moderate cases*
  *U4s/ L5s – for mild cases*</text>
    <formatted_text>#### What Does Camouflage Mean?

*To correct the malocclusion while making the underlying skeletal problem less apparent.*

#### How Do We Camouflage a Class II Skeletal Malocclusion?

Extractions:

- U4s — for moderate cases
- U4s/L5s — for mild cases</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="00:57:54" confidence="5" anchor="To correct the malocclusion while making the underlying skeletal problem less ap">

&gt; [!example] Class II Camouflage Case
&gt; A patient had no significant crowding, protruding incisors, excessive overjet, and a Class II facial profile.
&gt;
&gt; - Extraction and incisor retraction improved upper lip protrusion, the nasal angle, and the overall facial profile.
&gt; - The maxilla and underlying skeletal problem were not changed; the improvement resulted from dental compensation.
&gt; - In Class II camouflage, upper incisors may be retracted or lower incisors moved to reduce the overjet, but camouflage is appropriate only when the skeletal discrepancy is not too severe.
</insert>
    </audio_inserts>
  </page>
  <page number="41">
    <text>Class II Camouflage
Extractions - 2 Premolars
THE UNIVERSITY OF
WESTERN
AUSTRALIA

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_10dcd48094c51bcd.webp)</text>
    <formatted_text>Extractions — 2 premolars</formatted_text>
    <images>
      <img order="0" bbox="27,210,775,947" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_10dcd48094c51bcd.webp">
        <description>A black-and-white photograph displaying a row of extracted human teeth arranged against a dark background. The specimens include molars with bifurcated roots on the left and single-rooted premolars and canines extending to the right, illustrating the anatomical variation in root structure.</description>
      </img>
    </images>
  </page>
  <page number="42">
    <text>Class II Camouflage
Extractions – U4s, L5s

THE UNIVERSITY OF
WESTERN
AUSTRALIA

SINE WISDOM

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_b179ba5f339ced42.webp)</text>
    <formatted_text>Extractions — U4s, L5s</formatted_text>
    <images>
      <img order="0" bbox="0,213,789,945" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_b179ba5f339ced42.webp">
        <description>A black-and-white photograph showing a collection of extracted human teeth arranged in two rows against a dark background. The image displays the roots and crowns of various tooth types, including multi-rooted molars and single-rooted anterior teeth, illustrating their anatomical forms.</description>
      </img>
    </images>
  </page>
  <page number="43">
    <text>**Class III Camouflage**

THE UNIVERSITY OF
WESTERN
AUSTRALIA

**Extractions**

L1 – for mild cases

U5s/ L4s

L4s – for moderate cases</text>
    <formatted_text>#### Extractions

- L1 — for mild cases
- U5s/L4s
- L4s — for moderate cases</formatted_text>
  </page>
  <page number="44">
    <text>**Class III camouflage**
**What are our options?**

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_5b060d481dc03b4a.webp)
![](L9.2 Level IV UnitB,C and treatment timing_figures/img_45000fe8adf7fcf1.webp)
![](L9.2 Level IV UnitB,C and treatment timing_figures/img_a1eaa3764a87c5a8.webp)
![](L9.2 Level IV UnitB,C and treatment timing_figures/img_3a63523170719cca.webp)
![Class III camouflage What are our options?](L9.2 Level IV UnitB,C and treatment timing_figures/img_ccf32c89a57f9881.webp)
![](L9.2 Level IV UnitB,C and treatment timing_figures/img_ee6d3ceb068f4deb.webp)</text>
    <formatted_text>What are our options?</formatted_text>
    <images>
      <img order="0" bbox="282,0,579,439" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_5b060d481dc03b4a.webp">
        <description>Clinical photo: A frontal portrait of a smiling patient wearing a red bandana. The eyes are obscured by digital ovals to maintain anonymity, and the image is cropped from a slide discussing camouflage options.</description>
      </img>
      <img order="1" bbox="1,446,338,754" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_45000fe8adf7fcf1.webp">
        <description>Clinical photograph showing an occlusal view of the maxillary dental arch. The image displays the arrangement of teeth and the palatal surface, with a visible midline diastema between the central incisors.</description>
      </img>
      <img order="2" bbox="1,765,334,998" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_a1eaa3764a87c5a8.webp">
        <description>Clinical photograph showing a close-up of the upper and lower teeth, with a small metallic attachment visible on one tooth.</description>
      </img>
      <img order="3" bbox="662,441,998,754" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_3a63523170719cca.webp">
        <description>Clinical intraoral photograph showing an occlusal view of the maxillary dental arch. The image displays the arrangement of teeth, including molars, premolars, canines, and incisors, along with the palate and labial frenum.</description>
      </img>
      <img order="4" bbox="341,755,655,999" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_ccf32c89a57f9881.webp" caption="Class III camouflage What are our options?">
        <description>Clinical intraoral photograph showing the anterior dentition in occlusion. The image displays a Class III skeletal relationship characterized by an edge-to-edge or reverse overjet of the incisors, with significant crowding and misalignment of the lower arch.</description>
      </img>
      <img order="5" bbox="661,767,998,998" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_ee6d3ceb068f4deb.webp">
        <description>Clinical photo: An intraoral view showing a significant dental malocclusion with crowded and misaligned teeth. The image illustrates the natural variation in tooth color, shape, and arrangement within the oral cavity.</description>
      </img>
    </images>
  </page>
  <page number="45">
    <text>**How did we camouflage?**

![](L9.2 Level IV UnitB,C and treatment timing_figures/img_684137024b1ef621.webp)</text>
    <formatted_text>How did we camouflage?</formatted_text>
    <images>
      <img order="0" bbox="0,0,1000,1000" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_684137024b1ef621.webp">
        <description>Clinical photo: A composite of five intraoral photographs showing the maxillary and mandibular dental arches from occlusal views, as well as frontal and lateral extraoral views. The images depict dentition with significant pigmentation on the gingiva and teeth in various positions.</description>
      </img>
    </images>
  </page>
  <page number="46">
    <text>![](L9.2 Level IV UnitB,C and treatment timing_figures/img_4f43ed2fc7f355c7.webp)</text>
    <images>
      <img order="0" bbox="507,1,963,705" bbox_format="xyxy_norm_1000" bbox_origin="top_left" bbox_space="page" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_4f43ed2fc7f355c7.webp">
        <description>Clinical photograph showing the face of a smiling young woman with dark, curly hair. The eyes have been obscured with brown ovals for anonymity, while the teeth are clearly visible in a wide smile against a light blue background.</description>
      </img>
    </images>
  </page>
  <page number="47">
    <text>**THE UNIVERSITY OF WESTERN AUSTRALIA**

**Make sure you review why the trend in extractions changed**</text>
    <formatted_text>Make sure you review why the trend in extractions changed.</formatted_text>
    <audio_inserts count="1">
      <insert timestamp="01:00:53" confidence="7" anchor="Make sure you review why the trend in extractions changed.">

&gt; [!note] Lecturer — Class III Camouflage
&gt; In a Class III relationship with a negative overjet, lower first premolars are commonly extracted so the lower incisors can be retracted.
&gt;
&gt; - Lower first premolars alone may correct the overjet but leave the lower incisors somewhat proclined.
&gt; - Combining lower first-premolar and upper second-premolar extractions can allow the upper first molars to move into a Class I relationship, although the upper second premolars may not fit ideally with the lower first molars.
&gt; - The preferred approach described was often extraction of four premolars, using lower first rather than lower second premolars.
&gt; - In a described case, the upper incisors were already proclined as compensation; lower first-premolar extraction reversed the negative overjet, improved facial aesthetics, but left imperfect posterior interdigitation.
&gt; - The choice between lower first- and second-premolar extraction depends on the individual case, with profile and facial-aesthetic improvement prioritized over a perfect Class I relationship when necessary.
</insert>
    </audio_inserts>
  </page>
  <page number="48">
    <text>THE UNIVERSITY OF
WESTERN
AUSTRALIA

![Warning Sign](data:image/png;base64,...) &lt;!-- triangle warning icon --&gt;

At the end of this course you &lt;ins&gt;DO&lt;/ins&gt; &lt;ins&gt;NOT&lt;/ins&gt; have the didactic knowledge or clinical skills to treat comprehensive orthodontic cases.</text>
    <formatted_text>&gt; At the end of this course you **DO NOT** have the didactic knowledge or clinical skills to treat comprehensive orthodontic cases.</formatted_text>
    <images>
      <img order="0" path="data:image/png;base64,..."/>
    </images>
  </page>
  <page number="49" origin="cases">
    <text>## Case: Class I malocclusion with severe crowding, intraoral photographs

### Question

**Scenario:** A patient with a Class I molar relationship and severe crowding is evaluated for orthodontic treatment timing and management.

**What's shown:** Intraoral photographs showing an occlusal view and the mandibular dental arch. The central incisors are erupted with no space, the lateral incisors are larger, and there is no space for the canines.

**Consider:** How to manage the severe crowding and utilize available space for alignment.


### Answer

**Observations:**
- Class I molar relationship.
- Central incisors are erupted with no space.
- Lateral incisors are larger, leaving no space for the canines.
- Severe crowding (up to 7-8 mm).
- Ample space is available in the leeway space.

**Reasoning:** 
- For mild crowding, treatment can wait until the permanent dentition. 
- For severe crowding, early intervention is needed to utilize the leeway space before the first permanent molars drift. 
- A lower lingual arch can be used to hold the molars and redirect the leeway space to alleviate the crowding, potentially avoiding extractions. 
- Timing is critical; the appliance should be prepared when the premolars have two-thirds root development, before the primary molars are lost or molars drift.

**Outcome:** 
- Early treatment with a lingual arch to redirect the leeway space, which can significantly amend the case and potentially avoid extractions.

**Takeaway:** 
- In Class I malocclusions with severe crowding, early intervention with a lingual arch can utilize the leeway space to resolve crowding and potentially avoid extractions, provided it is timed correctly before molar drift occurs.

## Case: Patient with severe crowding and uplifted nose evaluated for serial extraction

### Question

**Scenario:** A female patient presents for orthodontic assessment with a convex profile, incompetent lips, and an uplifted nose. Intraoral examination reveals severe crowding with no space for the lateral incisors to erupt.

**What's shown:** Clinical photographs of the patient's profile and intraoral occlusal views, followed by a panoramic radiograph (OPG). The profile shows a convex shape and an uplifted nose. The intraoral photos show a low labial frenum, diastemas, and lateral incisors that are nearly twice the size of the centrals, with no space for eruption. The OPG shows a blocked lower lateral incisor and a palatally located upper lateral incisor.

**Consider:** How would you assess this patient's facial and intraoral features, and what is the proposed step-by-step serial extraction plan to manage the severe crowding and prevent impactions?


### Answer

**Observations:**
- Profile: Convex profile, incompetent lips, and an uplifted nose (which must be considered in planning, as maxillary advancement could worsen the nasal appearance).
- Intraoral: Low labial frenum insertion, diastemas, and severe crowding with absolutely no space for the lateral incisors. The lateral incisors are almost double the size of the centrals and are in contact with the primary canines.
- OPG: Lack of space in both arches. One lower lateral incisor has erupted while the other is blocked. An upper lateral incisor is palatally located.

**Reasoning:** 
- The immediate objective is to provide space to prevent blockage and impaction of the permanent teeth.
- The first step in serial extraction is to extract the primary canines (lower Ds or upper Cs) to allow the lateral incisors to erupt.
- The patient must be followed up with annual OPGs to monitor eruption.
- When the second premolars are expected to erupt, an OPG is taken. If the first and second premolars are blocking each other or if there is ectopic eruption, the first premolars are extracted.
- In this patient, the lower first premolars will likely erupt faster than the lower permanent canines, and the upper first premolars will also erupt earlier, confirming the need to eventually extract the first premolars.

**Outcome:** 
- The proposed plan is to extract the primary canines to allow lateral incisor eruption, followed by monitoring and eventual extraction of the first premolars as part of a serial extraction protocol.

**Takeaway:** 
- In cases of severe crowding with no space for lateral incisors, serial extraction (starting with primary canines) is used to provide immediate space and prevent impactions, with careful consideration of facial profile features like an uplifted nose during overall treatment planning.
</text>
    <formatted_text>## Case: Class I malocclusion with severe crowding, intraoral photographs

### Question

**Scenario:** A patient with a Class I molar relationship and severe crowding is evaluated for orthodontic treatment timing and management.

**What's shown:** Intraoral photographs showing an occlusal view and the mandibular dental arch. The central incisors are erupted with no space, the lateral incisors are larger, and there is no space for the canines.

**Consider:** How to manage the severe crowding and utilize available space for alignment.


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_2675a183f77ead8a.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_8fbbf88a1525af68.webp)
### Answer

**Observations:**
- Class I molar relationship.
- Central incisors are erupted with no space.
- Lateral incisors are larger, leaving no space for the canines.
- Severe crowding (up to 7-8 mm).
- Ample space is available in the leeway space.

**Reasoning:** 
- For mild crowding, treatment can wait until the permanent dentition. 
- For severe crowding, early intervention is needed to utilize the leeway space before the first permanent molars drift. 
- A lower lingual arch can be used to hold the molars and redirect the leeway space to alleviate the crowding, potentially avoiding extractions. 
- Timing is critical; the appliance should be prepared when the premolars have two-thirds root development, before the primary molars are lost or molars drift.

**Outcome:** 
- Early treatment with a lingual arch to redirect the leeway space, which can significantly amend the case and potentially avoid extractions.

**Takeaway:** 
- In Class I malocclusions with severe crowding, early intervention with a lingual arch can utilize the leeway space to resolve crowding and potentially avoid extractions, provided it is timed correctly before molar drift occurs.

## Case: Patient with severe crowding and uplifted nose evaluated for serial extraction

### Question

**Scenario:** A female patient presents for orthodontic assessment with a convex profile, incompetent lips, and an uplifted nose. Intraoral examination reveals severe crowding with no space for the lateral incisors to erupt.

**What's shown:** Clinical photographs of the patient's profile and intraoral occlusal views, followed by a panoramic radiograph (OPG). The profile shows a convex shape and an uplifted nose. The intraoral photos show a low labial frenum, diastemas, and lateral incisors that are nearly twice the size of the centrals, with no space for eruption. The OPG shows a blocked lower lateral incisor and a palatally located upper lateral incisor.

**Consider:** How would you assess this patient's facial and intraoral features, and what is the proposed step-by-step serial extraction plan to manage the severe crowding and prevent impactions?


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_b4d859ac5bfc1abe.webp)
### Answer

**Observations:**
- Profile: Convex profile, incompetent lips, and an uplifted nose (which must be considered in planning, as maxillary advancement could worsen the nasal appearance).
- Intraoral: Low labial frenum insertion, diastemas, and severe crowding with absolutely no space for the lateral incisors. The lateral incisors are almost double the size of the centrals and are in contact with the primary canines.
- OPG: Lack of space in both arches. One lower lateral incisor has erupted while the other is blocked. An upper lateral incisor is palatally located.

**Reasoning:** 
- The immediate objective is to provide space to prevent blockage and impaction of the permanent teeth.
- The first step in serial extraction is to extract the primary canines (lower Ds or upper Cs) to allow the lateral incisors to erupt.
- The patient must be followed up with annual OPGs to monitor eruption.
- When the second premolars are expected to erupt, an OPG is taken. If the first and second premolars are blocking each other or if there is ectopic eruption, the first premolars are extracted.
- In this patient, the lower first premolars will likely erupt faster than the lower permanent canines, and the upper first premolars will also erupt earlier, confirming the need to eventually extract the first premolars.

**Outcome:** 
- The proposed plan is to extract the primary canines to allow lateral incisor eruption, followed by monitoring and eventual extraction of the first premolars as part of a serial extraction protocol.

**Takeaway:** 
- In cases of severe crowding with no space for lateral incisors, serial extraction (starting with primary canines) is used to provide immediate space and prevent impactions, with careful consideration of facial profile features like an uplifted nose during overall treatment planning.
</formatted_text>
    <heading_path>Case: Class I malocclusion with severe crowding, intraoral photographs</heading_path>
    <images>
      <img order="0" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_2675a183f77ead8a.webp" media="frame" source="slide" page="3" timestamp="00:00:51">
        <description>Clinical intraoral photograph showing an occlusal view of the mandibular dental arch. The image displays the lower teeth arranged in a U-shape with visible crowding and misalignment of the anterior incisors.</description>
      </img>
      <img order="1" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_8fbbf88a1525af68.webp" media="frame" source="slide" page="3" timestamp="00:00:51">
        <description>Clinical intraoral photograph showing the mandibular dental arch from an occlusal view. The image illustrates anterior crowding and misalignment of the lower incisors, consistent with the slide's topic of Class I crowding.</description>
      </img>
      <img order="2" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_b4d859ac5bfc1abe.webp" media="frame" source="slide" page="7" timestamp="00:18:35">
        <description>Clinical photo: A side-by-side comparison showing the frontal and profile facial views of a child with curly hair. The images illustrate specific facial features, including an open mouth posture in the frontal view and a convex profile with lips parted in the lateral view.</description>
      </img>
    </images>
  </page>
  <page number="50" origin="cases">
    <text>## Case: Lower midline shift due to missed primary canine extraction

### Question

**Scenario:** A patient who never visited a dentist, resulting in a missed early extraction of a lower primary canine.

**What's shown:** A clinical photograph showing an occlusal view of the mandibular arch.

**Consider:** What is the problem observed, and what is the recommended management?


### Answer

**Observations:**
- The lower primary canine was not extracted early as planned.
- The lateral incisor on the left side has occupied the space due to anterior crowding.
- A lower midline shift to the left is developing or established.

**Reasoning:** The failure to extract the primary canine in the presence of anterior crowding allowed the lateral incisor to drift into the space, pulling the midline to the left.

**Outcome:** It is recommended to extract the primary canine on the right side and place a lingual arch to maintain molar position and prevent further shift. If the midline shift is already established, partial braces are required to reopen the space.

**Takeaway:** Early extraction of primary canines in crowded arches prevents lateral incisors from occupying the space and causing a midline shift; established shifts require partial braces for space regaining.

## Case: Space regaining for established lower midline shift

### Question

**Scenario:** An analogous situation to the previous case, where a patient presents with an established lower midline deviation and requires space regaining.

**What's shown:** A clinical intraoral photograph showing the mandibular arch fitted with a lingual arch and partial fixed appliances with a push coil.

**Consider:** How can the lower midline deviation be corrected in this scenario?


### Answer

**Observations:**
- The mandibular arch is fitted with a lingual arch.
- Partial fixed appliances (braces) are in place.
- A push coil is placed in the arch.

**Reasoning:** By extracting the primary canines and utilizing a push coil with partial braces, space can be actively regained to correct the midline deviation and bring the lateral incisor back to its proper position.

**Outcome:** The lower midline deviation is corrected.

**Takeaway:** When a lower midline shift is already established, partial fixed appliances with a push coil can be used to regain space and correct the deviation.

## Case: Headgear treatment, before and after clinical photos

### Question

**Scenario:** A patient undergoes early treatment for a skeletal discrepancy using a removable appliance.

**What's shown:** Clinical photographs showing the patient's facial profile before and after the first phase of treatment.

**Consider:** What are the observed changes following the first phase of treatment?


### Answer

**Observations:**
- A very good catch-up of the overjet.
- No significant change in the facial profile.

**Reasoning:** The treatment was completed using only headgear, without braces, timed around the peak of the growth spurt to achieve a quick first phase and reduce the overjet.

**Outcome:** The overjet was successfully reduced using headgear alone, which addresses the skeletal problem and makes the anticipated second phase of treatment easier.

**Takeaway:** Headgear can effectively reduce overjet in Class II malocclusions during the first phase of treatment, even if profile changes are minimal.
</text>
    <formatted_text>## Case: Lower midline shift due to missed primary canine extraction

### Question

**Scenario:** A patient who never visited a dentist, resulting in a missed early extraction of a lower primary canine.

**What's shown:** A clinical photograph showing an occlusal view of the mandibular arch.

**Consider:** What is the problem observed, and what is the recommended management?


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_58b44b824d0a00e9.webp)
### Answer

**Observations:**
- The lower primary canine was not extracted early as planned.
- The lateral incisor on the left side has occupied the space due to anterior crowding.
- A lower midline shift to the left is developing or established.

**Reasoning:** The failure to extract the primary canine in the presence of anterior crowding allowed the lateral incisor to drift into the space, pulling the midline to the left.

**Outcome:** It is recommended to extract the primary canine on the right side and place a lingual arch to maintain molar position and prevent further shift. If the midline shift is already established, partial braces are required to reopen the space.

**Takeaway:** Early extraction of primary canines in crowded arches prevents lateral incisors from occupying the space and causing a midline shift; established shifts require partial braces for space regaining.

## Case: Space regaining for established lower midline shift

### Question

**Scenario:** An analogous situation to the previous case, where a patient presents with an established lower midline deviation and requires space regaining.

**What's shown:** A clinical intraoral photograph showing the mandibular arch fitted with a lingual arch and partial fixed appliances with a push coil.

**Consider:** How can the lower midline deviation be corrected in this scenario?


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_72e95e27731e5123.webp)
### Answer

**Observations:**
- The mandibular arch is fitted with a lingual arch.
- Partial fixed appliances (braces) are in place.
- A push coil is placed in the arch.

**Reasoning:** By extracting the primary canines and utilizing a push coil with partial braces, space can be actively regained to correct the midline deviation and bring the lateral incisor back to its proper position.

**Outcome:** The lower midline deviation is corrected.

**Takeaway:** When a lower midline shift is already established, partial fixed appliances with a push coil can be used to regain space and correct the deviation.

## Case: Headgear treatment, before and after clinical photos

### Question

**Scenario:** A patient undergoes early treatment for a skeletal discrepancy using a removable appliance.

**What's shown:** Clinical photographs showing the patient's facial profile before and after the first phase of treatment.

**Consider:** What are the observed changes following the first phase of treatment?


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_1463eecfa4c651cf.webp)
### Answer

**Observations:**
- A very good catch-up of the overjet.
- No significant change in the facial profile.

**Reasoning:** The treatment was completed using only headgear, without braces, timed around the peak of the growth spurt to achieve a quick first phase and reduce the overjet.

**Outcome:** The overjet was successfully reduced using headgear alone, which addresses the skeletal problem and makes the anticipated second phase of treatment easier.

**Takeaway:** Headgear can effectively reduce overjet in Class II malocclusions during the first phase of treatment, even if profile changes are minimal.
</formatted_text>
    <heading_path>Case: Lower midline shift due to missed primary canine extraction</heading_path>
    <images>
      <img order="0" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_58b44b824d0a00e9.webp" media="frame" source="slide" page="12" timestamp="00:27:00">
        <description>Clinical photograph showing an occlusal view of the lower dental arch. The image reveals several primary molars with large, dark metallic restorations (stainless steel crowns or amalgam fillings), illustrating significant tooth decay.</description>
      </img>
      <img order="1" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_72e95e27731e5123.webp" media="frame" source="slide" page="13" timestamp="00:28:35">
        <description>Clinical intraoral photograph showing the mandibular arch fitted with fixed orthodontic appliances. The image displays metal brackets bonded to the lower teeth, connected by a wire secured with pink elastic ligatures, and a heavy stainless steel lingual archwire connecting the posterior molars.</description>
      </img>
      <img order="2" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_1463eecfa4c651cf.webp" media="frame" source="slide" page="20" timestamp="00:39:03">
        <description>Clinical photo: A four-panel composite showing lateral facial profiles (top) and intraoral buccal views of the dentition (bottom). The images illustrate a comparison between two states, likely before and after treatment, with brown circles obscuring the patients' eyes.</description>
      </img>
    </images>
  </page>
  <page number="51" origin="cases">
    <text>## Case: Herbst appliance treatment, superimpositions

### Question

**Scenario:** A patient is treated with a fixed functional appliance for a lower jaw discrepancy.

**What's shown:** Superimpositions or tracings (black for before, red for after) showing the dental and skeletal changes.

**Consider:** What skeletal and dental changes are observed following the use of the appliance?


### Answer

**Observations:**
- Protrusion of the lower incisors.
- Minimal vertical rotation of the mandible.
- Primarily an anteroposterior relationship change.
- Remodeling of the condyle.

**Reasoning:** The fixed functional appliance (Herbst) connects the upper first molars to the canine area, pushing the mandible forward. This redirects growth and causes remodeling of the anterior wall of the glenoid fossa, solving the mandibular deficiency primarily in the anteroposterior dimension without significant vertical rotation.

**Outcome:** The mandibular deficiency was resolved through condylar remodeling and forward positioning of the mandible.

**Takeaway:** Fixed functional appliances like the Herbst appliance correct mandibular deficiencies primarily through anteroposterior changes and condylar remodeling, with minimal vertical rotation.

## Case: Dental crossbite with functional shift, treated with a double arch

### Question

**Scenario:** A patient presenting with a crossbite and an associated functional shift.

**What's shown:** Intraoral photographs showing a double arch appliance in place.

**Consider:** What is the mechanism of action of this appliance, and what type of crossbite is it indicated for?


### Answer

**Observations:**
- The double arch appliance is in place.
- The treatment achieves dental changes by moving the molars slightly buccally.
- There is no widening of the midline suture.

**Reasoning:** The crossbite is purely dental (e.g., edge-to-edge or localized) rather than a true skeletal narrow maxilla. Therefore, the goal is to eliminate the functional shift and achieve dental compensation by tipping the teeth buccally, rather than attempting skeletal sutural expansion.

**Outcome:** The functional shift is eliminated and the dental crossbite is corrected by moving the molars buccally.

**Takeaway:** A double arch appliance is an effective treatment for dental crossbites with a functional shift, achieving dental compensation without skeletal sutural expansion.

## Case: Skeletal crossbite in a hyperdivergent patient

### Question

**Scenario:** A hyperdivergent patient presenting with a severe skeletal crossbite requiring expansion.

**What's shown:** An encapsulated expander with jack screws.

**Consider:** Why was this specific type of expander chosen for this patient?


### Answer

**Observations:**
- The expander is encapsulated, covering the teeth.
- Jack screws are used for activation.

**Reasoning:** In a hyperdivergent patient, conventional expansion would cause buccal tipping of the molars, leading to an undesirable clockwise rotation of the mandible and increased vertical dimension. The encapsulation restricts this molar tipping, directing the orthopedic force to open the midpalatal suture instead.

**Outcome:** The midpalatal suture is opened with minimal molar tipping, preventing adverse clockwise mandibular rotation.

**Takeaway:** Encapsulated expanders are indicated for hyperdivergent patients with skeletal crossbites to prevent molar tipping and avoid worsening the vertical dimension through clockwise mandibular rotation.

## Case: Class III retrusive maxilla, before and after treatment

### Question

**Scenario:** A patient with a well-established Class III malocclusion due to a retrusive maxilla.

**What's shown:** Before and after clinical photographs of the patient's profile and anterior dentition.

**Consider:** Evaluate the treatment outcome based on the clinical changes.

</text>
    <formatted_text>## Case: Herbst appliance treatment, superimpositions

### Question

**Scenario:** A patient is treated with a fixed functional appliance for a lower jaw discrepancy.

**What's shown:** Superimpositions or tracings (black for before, red for after) showing the dental and skeletal changes.

**Consider:** What skeletal and dental changes are observed following the use of the appliance?


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_a6714574903bfb37.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_c40ff7cc47bc8e1c.webp)
### Answer

**Observations:**
- Protrusion of the lower incisors.
- Minimal vertical rotation of the mandible.
- Primarily an anteroposterior relationship change.
- Remodeling of the condyle.

**Reasoning:** The fixed functional appliance (Herbst) connects the upper first molars to the canine area, pushing the mandible forward. This redirects growth and causes remodeling of the anterior wall of the glenoid fossa, solving the mandibular deficiency primarily in the anteroposterior dimension without significant vertical rotation.

**Outcome:** The mandibular deficiency was resolved through condylar remodeling and forward positioning of the mandible.

**Takeaway:** Fixed functional appliances like the Herbst appliance correct mandibular deficiencies primarily through anteroposterior changes and condylar remodeling, with minimal vertical rotation.

## Case: Dental crossbite with functional shift, treated with a double arch

### Question

**Scenario:** A patient presenting with a crossbite and an associated functional shift.

**What's shown:** Intraoral photographs showing a double arch appliance in place.

**Consider:** What is the mechanism of action of this appliance, and what type of crossbite is it indicated for?


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_8d40cbcc6fbc65ca.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_f5cf0e6b79576dcd.webp)
### Answer

**Observations:**
- The double arch appliance is in place.
- The treatment achieves dental changes by moving the molars slightly buccally.
- There is no widening of the midline suture.

**Reasoning:** The crossbite is purely dental (e.g., edge-to-edge or localized) rather than a true skeletal narrow maxilla. Therefore, the goal is to eliminate the functional shift and achieve dental compensation by tipping the teeth buccally, rather than attempting skeletal sutural expansion.

**Outcome:** The functional shift is eliminated and the dental crossbite is corrected by moving the molars buccally.

**Takeaway:** A double arch appliance is an effective treatment for dental crossbites with a functional shift, achieving dental compensation without skeletal sutural expansion.

## Case: Skeletal crossbite in a hyperdivergent patient

### Question

**Scenario:** A hyperdivergent patient presenting with a severe skeletal crossbite requiring expansion.

**What's shown:** An encapsulated expander with jack screws.

**Consider:** Why was this specific type of expander chosen for this patient?


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_618f8ef0f0a0d1e8.webp)
### Answer

**Observations:**
- The expander is encapsulated, covering the teeth.
- Jack screws are used for activation.

**Reasoning:** In a hyperdivergent patient, conventional expansion would cause buccal tipping of the molars, leading to an undesirable clockwise rotation of the mandible and increased vertical dimension. The encapsulation restricts this molar tipping, directing the orthopedic force to open the midpalatal suture instead.

**Outcome:** The midpalatal suture is opened with minimal molar tipping, preventing adverse clockwise mandibular rotation.

**Takeaway:** Encapsulated expanders are indicated for hyperdivergent patients with skeletal crossbites to prevent molar tipping and avoid worsening the vertical dimension through clockwise mandibular rotation.

## Case: Class III retrusive maxilla, before and after treatment

### Question

**Scenario:** A patient with a well-established Class III malocclusion due to a retrusive maxilla.

**What's shown:** Before and after clinical photographs of the patient's profile and anterior dentition.

**Consider:** Evaluate the treatment outcome based on the clinical changes.


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_121867eda35e7cc4.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_214c271b66680241.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_cc74dee39dcf3b9a.webp)</formatted_text>
    <heading_path>Case: Herbst appliance treatment, superimpositions</heading_path>
    <images>
      <img order="0" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_a6714574903bfb37.webp" media="frame" source="slide" page="21" timestamp="00:39:30">
        <description>Herbst treatment (fixed functional appliance) How does it work? A composite image showing the results of Herbst treatment, featuring lateral facial profiles (before and after) with eyes obscured, a close-up of the metal appliance mechanism attached to teeth, and intraoral views of dental occlusion.</description>
      </img>
      <img order="1" type="diagram" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_c40ff7cc47bc8e1c.webp" media="frame" source="slide" page="22" timestamp="00:40:13">
        <description>A line drawing diagram illustrating the skeletal changes associated with orthognathic surgery, specifically a Le Fort I osteotomy. The image depicts the maxilla being repositioned relative to the mandible and cranial base, using red outlines to show the movement or 'changes' in the dental arches and jaw relationship.</description>
      </img>
      <img order="2" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_8d40cbcc6fbc65ca.webp" media="frame" source="slide" page="33" timestamp="00:50:34">
        <description>C Clinical photo: An intraoral frontal view of the dentition in centric occlusion, showing the upper and lower teeth meeting with visible spacing (diastemas) between several anterior teeth.</description>
      </img>
      <img order="3" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_f5cf0e6b79576dcd.webp" media="frame" source="slide" page="33" timestamp="00:50:34">
        <description>E Clinical intraoral photograph showing a frontal view of the teeth in occlusion. The image displays an anterior crossbite relationship where the lower incisors are positioned labially (in front of) the upper incisors, along with visible spacing between the teeth.</description>
      </img>
      <img order="4" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_618f8ef0f0a0d1e8.webp" media="frame" source="slide" page="34" timestamp="00:51:37">
        <description>For skeletal x-bites, sutural expansion is recommended Clinical photograph showing an intraoral view of a maxillary expansion appliance, specifically a Hyrax-type screw device cemented to acrylic splints covering the posterior teeth. The metal central jackscrew mechanism is positioned across the midline of the palate, illustrating the hardware used for sutural expansion.</description>
      </img>
      <img order="5" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_121867eda35e7cc4.webp" media="frame" source="slide" page="26" timestamp="00:44:28">
        <description>Reverse Pull headgear protracts the Maxilla and tips the teeth forward A composite of five clinical photographs illustrating the application and mechanics of reverse-pull headgear. The images include an extra-oral view of a child wearing a protraction facemask, an intra-oral occlusal view showing a bonded appliance with metal framework, and lateral views demonstrating the placement of hooks on molar bands for traction.</description>
      </img>
      <img order="6" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_214c271b66680241.webp" media="frame" source="slide" page="27" timestamp="00:47:07">
        <description>Clinical profile photograph of a child showing the side view of the face and head against a blue background. A yellow vertical line is superimposed over the facial profile, likely used to assess skeletal or dental alignment relative to the soft tissue.</description>
      </img>
      <img order="7" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_cc74dee39dcf3b9a.webp" media="frame" source="slide" page="27" timestamp="00:47:07">
        <description>A lateral clinical photograph of a child's head and neck, showing the facial profile against a blue background. A yellow line is drawn vertically along the front of the face to illustrate the profile line, while an oval obscures the eye area.</description>
      </img>
    </images>
  </page>
  <page number="52" origin="cases">
    <text>### Answer

**Observations:**
- The anterior crossbite has been corrected.
- There is a slight improvement in the upper facial profile.

**Reasoning:** The patient presented with a retrusive maxilla and an anterior crossbite. Orthopedic treatment (such as a face mask and rapid maxillary expansion) was utilized to protract the maxilla and correct the crossbite, resulting in the observed profile improvements.

**Outcome:** The anterior crossbite was successfully corrected, and a slight improvement in the upper profile was achieved.

**Takeaway:** Orthopedic treatment for a retrusive maxilla can effectively correct anterior crossbites and improve the facial profile, though overcorrection is often necessary to account for potential relapse and continued growth.

## Case: Class II profile camouflage with extractions

### Question

**Scenario:** A patient presents with a Class II skeletal profile and protrusion, but without dental crowding.

**What's shown:** Clinical photographs of the patient's profile, incisors, and overjet, along with before and after images showing the results of treatment.

**Consider:** Why extract teeth in a non-crowded case, and how does this approach improve the Class II profile?


### Answer

**Observations:**
- The patient has no crowding but presents with a protruded profile and increased overjet.
- Before and after images show correction of the upper lip protrusion and an improved nasolabial angle.
- Treatment involved the extraction of upper first premolars to retract the canines and incisors.

**Reasoning:** The underlying skeletal Class II problem is compensated for (camouflaged) by extracting upper first premolars. This creates space to retract the anterior teeth, reducing the overjet and improving the soft tissue profile and aesthetics, even though the final occlusion finishes in a Class II relationship.

**Outcome:** The patient's profile and aesthetics were improved, with correction of the upper lip protrusion and nasolabial angle, finishing in a Class II occlusion.

**Takeaway:** Extractions can be used for camouflage in non-crowded Class II cases to improve facial aesthetics and profile, prioritizing facial improvement over achieving a Class I occlusion.

## Case: Class III camouflage with lower premolar extractions

### Question

**Scenario:** A patient presents with a Class III skeletal relationship, a negative overjet, and proclined incisors attempting to compensate.

**What's shown:** Clinical photographs showing a frontal portrait, occlusal views of the Class III relationship and negative overjet, and before and after facial images.

**Consider:** How can extractions be used to camouflage a Class III malocclusion, and what are the limitations of this approach?


### Answer

**Observations:**
- The patient has a Class III relationship with a negative overjet and proclined upper and lower incisors.
- Treatment involved the extraction of the lower first premolars.
- Before and after photos show an improved facial profile.

**Reasoning:** Extracting the lower first premolars provides space to reverse the negative overjet and improve the aesthetic profile. However, because the lower incisors were already proclined, they cannot be completely corrected and remain somewhat proclined. Additionally, achieving ideal interdigitation is difficult because the lower second premolar does not sit properly with the lower first molar. Alternatively, extracting the lower second premolars could allow bringing the lower first molar forward to engage in a Class I relationship, but this varies from case to case.

**Outcome:** The negative overjet was reversed and the facial profile was aesthetically improved, though the lower incisors remained slightly proclined and the interdigitation was not ideal.

**Takeaway:** In Class III camouflage, extracting lower first premolars can successfully improve the profile and reverse a negative overjet, but perfect incisor inclination and ideal interdigitation may not be fully achievable.
</text>
    <formatted_text>### Answer

**Observations:**
- The anterior crossbite has been corrected.
- There is a slight improvement in the upper facial profile.

**Reasoning:** The patient presented with a retrusive maxilla and an anterior crossbite. Orthopedic treatment (such as a face mask and rapid maxillary expansion) was utilized to protract the maxilla and correct the crossbite, resulting in the observed profile improvements.

**Outcome:** The anterior crossbite was successfully corrected, and a slight improvement in the upper profile was achieved.

**Takeaway:** Orthopedic treatment for a retrusive maxilla can effectively correct anterior crossbites and improve the facial profile, though overcorrection is often necessary to account for potential relapse and continued growth.

## Case: Class II profile camouflage with extractions

### Question

**Scenario:** A patient presents with a Class II skeletal profile and protrusion, but without dental crowding.

**What's shown:** Clinical photographs of the patient's profile, incisors, and overjet, along with before and after images showing the results of treatment.

**Consider:** Why extract teeth in a non-crowded case, and how does this approach improve the Class II profile?


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_9633ae228e91db91.webp)
### Answer

**Observations:**
- The patient has no crowding but presents with a protruded profile and increased overjet.
- Before and after images show correction of the upper lip protrusion and an improved nasolabial angle.
- Treatment involved the extraction of upper first premolars to retract the canines and incisors.

**Reasoning:** The underlying skeletal Class II problem is compensated for (camouflaged) by extracting upper first premolars. This creates space to retract the anterior teeth, reducing the overjet and improving the soft tissue profile and aesthetics, even though the final occlusion finishes in a Class II relationship.

**Outcome:** The patient's profile and aesthetics were improved, with correction of the upper lip protrusion and nasolabial angle, finishing in a Class II occlusion.

**Takeaway:** Extractions can be used for camouflage in non-crowded Class II cases to improve facial aesthetics and profile, prioritizing facial improvement over achieving a Class I occlusion.

## Case: Class III camouflage with lower premolar extractions

### Question

**Scenario:** A patient presents with a Class III skeletal relationship, a negative overjet, and proclined incisors attempting to compensate.

**What's shown:** Clinical photographs showing a frontal portrait, occlusal views of the Class III relationship and negative overjet, and before and after facial images.

**Consider:** How can extractions be used to camouflage a Class III malocclusion, and what are the limitations of this approach?


![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_5b060d481dc03b4a.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_3a63523170719cca.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_45000fe8adf7fcf1.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_ccf32c89a57f9881.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_a1eaa3764a87c5a8.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_ee6d3ceb068f4deb.webp)
![](L9.2 Level IV UnitB,C and treatment timing_cases_attachments/img_684137024b1ef621.webp)
### Answer

**Observations:**
- The patient has a Class III relationship with a negative overjet and proclined upper and lower incisors.
- Treatment involved the extraction of the lower first premolars.
- Before and after photos show an improved facial profile.

**Reasoning:** Extracting the lower first premolars provides space to reverse the negative overjet and improve the aesthetic profile. However, because the lower incisors were already proclined, they cannot be completely corrected and remain somewhat proclined. Additionally, achieving ideal interdigitation is difficult because the lower second premolar does not sit properly with the lower first molar. Alternatively, extracting the lower second premolars could allow bringing the lower first molar forward to engage in a Class I relationship, but this varies from case to case.

**Outcome:** The negative overjet was reversed and the facial profile was aesthetically improved, though the lower incisors remained slightly proclined and the interdigitation was not ideal.

**Takeaway:** In Class III camouflage, extracting lower first premolars can successfully improve the profile and reverse a negative overjet, but perfect incisor inclination and ideal interdigitation may not be fully achievable.
</formatted_text>
    <heading_path>Case: Class III retrusive maxilla, before and after treatment &gt; Answer</heading_path>
    <images>
      <img order="0" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_9633ae228e91db91.webp" media="frame" source="slide" page="39" timestamp="00:57:41">
        <description>A composite image containing four clinical photographs of a patient arranged in a grid. The top row displays left-facing lateral profiles, while the bottom row shows frontal views; the eyes are obscured by peach-colored ovals for anonymity.</description>
      </img>
      <img order="1" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_5b060d481dc03b4a.webp" media="frame" source="slide" page="44" timestamp="01:00:46">
        <description>Clinical photo: A frontal portrait of a smiling patient wearing a red bandana. The eyes are obscured by digital ovals to maintain anonymity, and the image is cropped from a slide discussing camouflage options.</description>
      </img>
      <img order="2" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_3a63523170719cca.webp" media="frame" source="slide" page="44" timestamp="01:00:46">
        <description>Clinical intraoral photograph showing an occlusal view of the maxillary dental arch. The image displays the arrangement of teeth, including molars, premolars, canines, and incisors, along with the palate and labial frenum.</description>
      </img>
      <img order="3" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_45000fe8adf7fcf1.webp" media="frame" source="slide" page="44" timestamp="01:00:46">
        <description>Clinical photograph showing an occlusal view of the maxillary dental arch. The image displays the arrangement of teeth and the palatal surface, with a visible midline diastema between the central incisors.</description>
      </img>
      <img order="4" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_ccf32c89a57f9881.webp" media="frame" source="slide" page="44" timestamp="01:00:46">
        <description>Class III camouflage What are our options? Clinical intraoral photograph showing the anterior dentition in occlusion. The image displays a Class III skeletal relationship characterized by an edge-to-edge or reverse overjet of the incisors, with significant crowding and misalignment of the lower arch.</description>
      </img>
      <img order="5" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_a1eaa3764a87c5a8.webp" media="frame" source="slide" page="44" timestamp="01:00:46">
        <description>Clinical photograph showing a close-up of the upper and lower teeth, with a small metallic attachment visible on one tooth.</description>
      </img>
      <img order="6" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_ee6d3ceb068f4deb.webp" media="frame" source="slide" page="44" timestamp="01:00:46">
        <description>Clinical photo: An intraoral view showing a significant dental malocclusion with crowded and misaligned teeth. The image illustrates the natural variation in tooth color, shape, and arrangement within the oral cavity.</description>
      </img>
      <img order="7" type="photo" path="L9.2 Level IV UnitB,C and treatment timing_figures/img_684137024b1ef621.webp" media="frame" source="slide" page="45" timestamp="01:01:09">
        <description>Clinical photo: A composite of five intraoral photographs showing the maxillary and mandibular dental arches from occlusal views, as well as frontal and lateral extraoral views. The images depict dentition with significant pigmentation on the gingiva and teeth in various positions.</description>
      </img>
    </images>
  </page>
  <footnotes>[^1]: Original PDF page 1: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=1|L9.2 Level IV UnitB,C and treatment timing, p.1]]
[^2]: Original PDF page 2: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=2|L9.2 Level IV UnitB,C and treatment timing, p.2]]
[^3]: Original PDF page 3: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=3|L9.2 Level IV UnitB,C and treatment timing, p.3]]
[^4]: Original PDF page 4: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=4|L9.2 Level IV UnitB,C and treatment timing, p.4]]
[^5]: Original PDF page 5: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=5|L9.2 Level IV UnitB,C and treatment timing, p.5]]
[^6]: Original PDF page 6: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=6|L9.2 Level IV UnitB,C and treatment timing, p.6]]
[^7]: Original PDF page 7: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=7|L9.2 Level IV UnitB,C and treatment timing, p.7]]
[^8]: Original PDF page 8: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=8|L9.2 Level IV UnitB,C and treatment timing, p.8]]
[^9]: Original PDF page 9: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=9|L9.2 Level IV UnitB,C and treatment timing, p.9]]
[^10]: Original PDF page 10: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=10|L9.2 Level IV UnitB,C and treatment timing, p.10]]
[^11]: Original PDF page 11: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=11|L9.2 Level IV UnitB,C and treatment timing, p.11]]
[^12]: Original PDF page 12: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=12|L9.2 Level IV UnitB,C and treatment timing, p.12]]
[^13]: Original PDF page 13: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=13|L9.2 Level IV UnitB,C and treatment timing, p.13]]
[^14]: Original PDF page 14: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=14|L9.2 Level IV UnitB,C and treatment timing, p.14]]
[^15]: Original PDF page 15: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=15|L9.2 Level IV UnitB,C and treatment timing, p.15]]
[^16]: Original PDF page 16: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=16|L9.2 Level IV UnitB,C and treatment timing, p.16]]
[^17]: Original PDF page 17: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=17|L9.2 Level IV UnitB,C and treatment timing, p.17]]
[^18]: Original PDF page 18: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=18|L9.2 Level IV UnitB,C and treatment timing, p.18]]
[^19]: Original PDF page 19: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=19|L9.2 Level IV UnitB,C and treatment timing, p.19]]
[^20]: Original PDF page 20: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=20|L9.2 Level IV UnitB,C and treatment timing, p.20]]
[^21]: Original PDF page 21: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=21|L9.2 Level IV UnitB,C and treatment timing, p.21]]
[^22]: Original PDF page 22: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=22|L9.2 Level IV UnitB,C and treatment timing, p.22]]
[^23]: Original PDF page 23: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=23|L9.2 Level IV UnitB,C and treatment timing, p.23]]
[^24]: Original PDF page 24: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=24|L9.2 Level IV UnitB,C and treatment timing, p.24]]
[^25]: Original PDF page 25: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=25|L9.2 Level IV UnitB,C and treatment timing, p.25]]
[^26]: Original PDF page 26: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=26|L9.2 Level IV UnitB,C and treatment timing, p.26]]
[^27]: Original PDF page 27: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=27|L9.2 Level IV UnitB,C and treatment timing, p.27]]
[^28]: Original PDF page 28: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=28|L9.2 Level IV UnitB,C and treatment timing, p.28]]
[^29]: Original PDF page 29: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=29|L9.2 Level IV UnitB,C and treatment timing, p.29]]
[^30]: Original PDF page 30: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=30|L9.2 Level IV UnitB,C and treatment timing, p.30]]
[^31]: Original PDF page 31: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=31|L9.2 Level IV UnitB,C and treatment timing, p.31]]
[^32]: Original PDF page 32: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=32|L9.2 Level IV UnitB,C and treatment timing, p.32]]
[^33]: Original PDF page 33: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=33|L9.2 Level IV UnitB,C and treatment timing, p.33]]
[^34]: Original PDF page 34: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=34|L9.2 Level IV UnitB,C and treatment timing, p.34]]
[^35]: Original PDF page 35: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=35|L9.2 Level IV UnitB,C and treatment timing, p.35]]
[^36]: Original PDF page 36: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=36|L9.2 Level IV UnitB,C and treatment timing, p.36]]
[^37]: Original PDF page 37: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=37|L9.2 Level IV UnitB,C and treatment timing, p.37]]
[^38]: Original PDF page 38: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=38|L9.2 Level IV UnitB,C and treatment timing, p.38]]
[^39]: Original PDF page 39: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=39|L9.2 Level IV UnitB,C and treatment timing, p.39]]
[^40]: Original PDF page 40: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=40|L9.2 Level IV UnitB,C and treatment timing, p.40]]
[^41]: Original PDF page 41: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=41|L9.2 Level IV UnitB,C and treatment timing, p.41]]
[^42]: Original PDF page 42: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=42|L9.2 Level IV UnitB,C and treatment timing, p.42]]
[^43]: Original PDF page 43: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=43|L9.2 Level IV UnitB,C and treatment timing, p.43]]
[^44]: Original PDF page 44: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=44|L9.2 Level IV UnitB,C and treatment timing, p.44]]
[^45]: Original PDF page 45: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=45|L9.2 Level IV UnitB,C and treatment timing, p.45]]
[^46]: Original PDF page 46: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=46|L9.2 Level IV UnitB,C and treatment timing, p.46]]
[^47]: Original PDF page 47: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=47|L9.2 Level IV UnitB,C and treatment timing, p.47]]
[^48]: Original PDF page 48: [[L9.2 Level IV UnitB,C and treatment timing.pdf#page=48|L9.2 Level IV UnitB,C and treatment timing, p.48]]</footnotes>
</document>
